Mašina za poliranje stakla Bottero 810 BCS

Bottero 810 BCS Variant (45°)

Technical Specifications of the Machine
Entry Conveyor:
Length: 2.6 m
Height: 80 cm

Exit Conveyor:
Length: 2.4 m
Height: 80 cm

General Dimensions:
Total machine length: 8.2 m
Table height: 2.4 m
Load capacity: 350 kg / m² of working area (3,500 kg / 10 m)
Tedoxr Dngepfx Abrod
Opening: 55 mm

Technical Features
Independent (disengageable) locking of entry and exit conveyors.
Stainless steel tank 200 / 850 / 300 with integrated pump compartment and filtration grid.
Round stainless steel cerium oxide tank 800 / 300 with agitator, pump, and filtration grid.
Automatic lubrication cycle programmable via the computer (short cycle / long cycle).
Chain system mounted on bearings with reinforced shafts.

Grinding Wheels (10 total):
Diamond – fixed
Diamond – fixed
Diamond / Resin – fixed
Polish 40 – 9RS40 – Pneumatic
Polish 60 – 9RS60 – Pneumatic
Cerium / Felt – X5000 – Pneumatic
Diamond – Bevels – fixed
Polish 80 – 9RS80 – Bevels – Pneumatic
Diamond – Bevels – fixed
Polish 80 – 9RS80 – Bevels – Pneumatic

Additional Technical Information
Inclination: up to 45°, allowing edge polishing from 0° to 45°.
Power consumption: approximately 27 kW.
Polish 1, Polish 2 and Cerium wheels can be operated at two motor speeds.
Integrated computer allows for almost full parameter adjustment on the machine.
Optional pads enable polishing of smaller plates up to 80 mm in height