Edge banderBrandt
Optimat KDN 330
Edge bander
Brandt
Optimat KDN 330
godina proizvodnje
2006
Stanje
Polovno
Lokacija
Njemačka 

Slike prikazuju
Prikaži kartu
Podaci o mašini
- Naziv mašine:
- Edge bander
- proizvođač:
- Brandt
- Model:
- Optimat KDN 330
- godina proizvodnje:
- 2006
- Stanje:
- polovno
Cijena i lokacija
- Lokacija:
- D - Bayern
Pozovite
Detalji ponude
- ID oglasa:
- A19137656
- Referentni broj:
- ISSH20250513-5319
- ažuriranje:
- posljednji put 19.06.2025
Opis
Used machine
Year of manufacture: 2006
With gluing unit for hot melt adhesive granulate
Processing of PU adhesive granulate possible, subject to adhesive processing regulations
Glue reservoir located below the glue roller
Ledewkbd Ejpfx Aadjah
Application of glue to the workpiece via glue roller in both co- and counter-rotation
With contact heating shoe for preheating the workpiece
Automatic edge magazine for roll material and fixed lengths
Pressure zone with pneumatically operated main pressure roller and special secondary pressure rollers to consolidate the upper and lower glue joints
Centrally adjustable top pressure
Central manual chain track lubrication
Control panel at the machine infeed
Cross-cut saw unit for front and rear edge overhang; high-precision linear guide
2 motors, each 0.18 kW
Swivel range for straight and bevel trimming: 0-15 degrees
Flush milling unit top and bottom with vertical and horizontal tracing
Swivel range 0-15 degrees with 2 milling motors and reversible insert combination (straight/radius)
Digital counters allow for fast and precise, i.e., repeatable, settings
Two-point pneumatic adjustment for upper and lower milling motors
Scraper unit for finishing with horizontal/vertical tracing
Extendable workpiece support up to 350 mm
Integrated track control for contactless control of processing functions.
Adjustable via keypad and LED display
Workpiece thickness: 8 - 50 mm
Edge thickness: 0.4 - 3 mm
Feed speed: approx. 9 m/min.
Connected load: 4.1 kW
Compressed air connection: 6 bar
Weight: approx. 750 kg
Machine length: 3,150 mm
Availability: short-term
Location: Röllbach
Oglas je automatski preveden. Moguće su greške u prijevodu.
Year of manufacture: 2006
With gluing unit for hot melt adhesive granulate
Processing of PU adhesive granulate possible, subject to adhesive processing regulations
Glue reservoir located below the glue roller
Ledewkbd Ejpfx Aadjah
Application of glue to the workpiece via glue roller in both co- and counter-rotation
With contact heating shoe for preheating the workpiece
Automatic edge magazine for roll material and fixed lengths
Pressure zone with pneumatically operated main pressure roller and special secondary pressure rollers to consolidate the upper and lower glue joints
Centrally adjustable top pressure
Central manual chain track lubrication
Control panel at the machine infeed
Cross-cut saw unit for front and rear edge overhang; high-precision linear guide
2 motors, each 0.18 kW
Swivel range for straight and bevel trimming: 0-15 degrees
Flush milling unit top and bottom with vertical and horizontal tracing
Swivel range 0-15 degrees with 2 milling motors and reversible insert combination (straight/radius)
Digital counters allow for fast and precise, i.e., repeatable, settings
Two-point pneumatic adjustment for upper and lower milling motors
Scraper unit for finishing with horizontal/vertical tracing
Extendable workpiece support up to 350 mm
Integrated track control for contactless control of processing functions.
Adjustable via keypad and LED display
Workpiece thickness: 8 - 50 mm
Edge thickness: 0.4 - 3 mm
Feed speed: approx. 9 m/min.
Connected load: 4.1 kW
Compressed air connection: 6 bar
Weight: approx. 750 kg
Machine length: 3,150 mm
Availability: short-term
Location: Röllbach
Oglas je automatski preveden. Moguće su greške u prijevodu.
Dobavljač
Napomena: Registrujte se besplatno ili prijavite, za pristup svim informacijama.
Registriran od: 2008
Pošaljite upit
Telefon & Faks
+49 6146 ... oglasi
Vaš oglas je uspješno izbrisan
Došlo je do greške