Mašina za pakovanje za e-trgovinu

BVM Brunner COMTEX 4G

Side Sealing Machine
- Manufacturer: BVM Brunner GmbH & Co. KG
- Machine type: Comtex 4G
- Machine No.: 20170259471
- Year of manufacture: 2017
- BVM reference no.: 5947
- Voltage, Frequency: 3N 400V, 50Hz
- Power specifications: P=18kW, I=26A, F=32AT
- Condition: Fully refurbished with warranty
Psdpfxjw Ryt Ds Aafoha
Comtex 4G Shipping System:
The BVM shipping system ‘Comtex 4G Shipping’ is the complete solution for mailing various items directly to customers, including labeling. Delivery notes, invoices, and goods are packed together in a tightly sealed PE film bag, labeled with the address sticker, and handed directly over to the respective logistics partner.
Technical data:
- Seal width: 750 mm (transverse), 800 mm (longitudinal)
- Product height: up to 250 mm
- Capacity: Up to 25 cycles/min*
(Special) features:
- Special color
- Signal control light with three colors to indicate error messages
- Pneumatically operated buffer plate and presence control for the film waste tray, enabling tray change during automatic operation (no machine stoppage required). Note: At this station, the Comtex working height is limited to 850 +/- 10 mm.
- Electronically controlled sealing bar drive (servo-driven, stepless speed adjustment)
- Film end detection by ultrasonic sensor, incl. analog input card (one per film carrier)
- Mechanical distribution device for film scrap strips in combination with a large film scrap storage
- Individual wire numbering in the control cabinet of the packaging machine for Comtex 3G and 4G
- Grooved aluminum profile covered with plastic profile
- Bypass conveyor as folding belt integrated in the Comtex downstream of the side sealing station for transferring products out of the machine
- Film folding device (no separate control) for converting flat film into center-folded film
- Film sealing device for flat films
- PN/PN coupler (Profinet coupler) for establishing a Profinet connection
- Software development for PN/PN coupling including release connection, interlock and combined fault message
- Film end detection at the film mount and film level detection at the film unwinder, detected by photoelectric sensors, including three-color signal lamp and acoustic signal
- Mounting preparation for labeler, suitable models on request, installed at the infeed including electrical and pneumatic connections
- Sealing bar for producing a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G and Compacta with EGS
- Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L)
- Reclosable film bag by means of double-sided adhesive tape in the film bag, incl. tear-off perforation wheel
- Additional tear-off perforation wheel, allowing complete removal of the bag’s edge area
- Stand-alone control cabinet for Comtex with 5 meter cable
- Two sequentially mounted indexing belts (600 x 900 mm/600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with space for installation of a scanner or camera incl. trigger light curtain for scanner
- Height adjustment of cross seal for pass-through height 220-250 mm
- Cognex scanner system, consisting of:
-- Scanner below the infeed for delivery notes
-- 2 overhead scanners
-- 1 overhead scanner for control
+++ Fully refurbished equipment with 12-month warranty according to our attached warranty conditions +++

Oglas je automatski preveden. Moguće su greške u prijevodu.