Mašina za savijanje cevi sa trnomCesurbend
        PBNC-51    
 Mašina za savijanje cevi sa trnom
Cesurbend
        PBNC-51    
            Stanje        
            Novi                    
            Lokacija        
                                                Mudersbach                                            

 Slike prikazuju            
 Prikaži kartu            
Podaci o mašini
Cijena i lokacija
- Lokacija:
 -             Stahlwerkstrasse 4, 57555 Mudersbach, DE                

 
 Pozovite            
Detalji ponude
- ID oglasa:
 - A20443230
 
- Ažuriranje:
 - posljednji put 03.11.2025
 
Opis
        Cesurbend Mandrel Tube Bending Machine PBNC-51
Technical Specifications
Max. Tube Diameter (mm): 51
Max. Tube Wall Thickness (mm): 3
Max. Bending Angle (°): 190
Tube Bending Rate (rpm): 7-10
Max. Hydraulic Pressure (bar): 200
Max. Bending Radius (mm): 250
Tube Length (mm): 3000
Bending Motor Power (kW): 5.5
Hydraulic Motor Power (kW): 3
Machine Width (mm): 1400
Machine Length (mm): 4215
Machine Height (mm): 1450
Machine Weight (kg): 1600
Features
Bodpoxt Rc Tsfx Abrolp
• In this process, the clamp jaw secures the tube after it is inserted into the machine. The tube is bent over the die with half its diameter. When using both the mandrel and the wiper die during bending, superior results are achieved for high-quality bends, thin wall thicknesses, and minimal radii.
• This is a three-cylinder machine with a hydraulic spool located behind the hydraulic boom.
Oglas je automatski preveden. Moguće su greške u prijevodu.
Technical Specifications
Max. Tube Diameter (mm): 51
Max. Tube Wall Thickness (mm): 3
Max. Bending Angle (°): 190
Tube Bending Rate (rpm): 7-10
Max. Hydraulic Pressure (bar): 200
Max. Bending Radius (mm): 250
Tube Length (mm): 3000
Bending Motor Power (kW): 5.5
Hydraulic Motor Power (kW): 3
Machine Width (mm): 1400
Machine Length (mm): 4215
Machine Height (mm): 1450
Machine Weight (kg): 1600
Features
Bodpoxt Rc Tsfx Abrolp
• In this process, the clamp jaw secures the tube after it is inserted into the machine. The tube is bent over the die with half its diameter. When using both the mandrel and the wiper die during bending, superior results are achieved for high-quality bends, thin wall thicknesses, and minimal radii.
• This is a three-cylinder machine with a hydraulic spool located behind the hydraulic boom.
Oglas je automatski preveden. Moguće su greške u prijevodu.
Dobavljač
            Napomena:        Registrujte se besplatno ili prijavite, za pristup svim informacijama.    
Pošaljite upit
Telefon & Faks
                            +49 271 5... oglasi                
            Vaš oglas je uspješno izbrisan            
            Došlo je do greške            






