Mašina za savijanje profila - trovaljna valjaonicaCurvatrice
DS60
Mašina za savijanje profila - trovaljna valjaonica
Curvatrice
DS60
EXW VB plus PDV
2.950 €
Godina proizvodnje
2000
Stanje
Polovno
(potpuno funkcionalan)
Lokacija
Metelen 

Osnovni podaci
- Naziv mašine:
- Mašina za savijanje profila - trovaljna valjaonica
- Proizvođač:
- Curvatrice
- Model:
- DS60
- Godina proizvodnje:
- 2000
- Stanje:
- dobar (korišteno)
- Funkcionalnost:
- potpuno funkcionalan
Cijena i lokacija
EXW VB plus PDV
2.950 €
- Lokacija:
- Metelen, Njemačka

Pozovite
Detalji ponude
- ID oglasa:
- A23348291
- Ažuriranje:
- posljednji put 18.11.2026
Opis
Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Ready for Use & with Special Modification
Manufacturer: Curvatrice s.r.l.
Model: DS60
Type: HV
Serial Number: 050G 1182
Year of Manufacture: 2000
For sale is a reliable and immediately ready-to-use profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV. We acquired the machine second-hand in 2012 and it has been continuously and well-maintained in our possession ever since.
We would be happy to demonstrate the machine on-site after prior arrangement.
Equipment & Scope of Supply:
• Rollers: Supplied including the standard rollers shown in the pictures (suitable for flat steel and U-profiles with flanges on the inside and outside). Further profiles require corresponding special tools.
12 spacer washers approx. round 78 x 3 mm
10 spacer washers approx. round 78 x 2 mm
40 spacer washers approx. round 78 x 1 mm
• Basic equipment: Original, laterally and height-adjustable guide rollers/shafts (34 x 270 mm) are included in the scope of supply.
• Special Modification for Transport & Installation: Specially manufactured, sturdy base frame for uncomplicated transport, including four height-adjustable leveling screws for precise alignment.
• Additional Modifications: An 8 mm thick steel plate has been mounted on the top side for the possible mounting of further attachments. In addition, a subsequently attached protective plate on the feed shaft reliably protects the slides from contamination.
Operation & Control:
• Separate control panel with digital position display for the upper roller
• Hydraulic feed/adjustment of the upper roller (controlled via operating buttons)
• Practical foot pedals for the rolling direction (left/right)
• Integrated emergency stop switch
Technical Data:
• Drive: 2.6 / 3.2 kW brake motor
• Speed: 2 stages (8 and 16 RPM)
• Shaft diameter: 50 mm (all three axes hardened and ground)
• Acceptance height: 115 mm
• Dimensions (H x W x L): approx. 1,360 x 750 x 1,500 mm
• Weight: approx. 425 kg
Important Notes:
• The performance data according to the manufacturer's brochure refers to a material strength of 40 kg/mm² (depending on the respective bending radius). These values are to be understood as approximate guidelines and are not binding. We will gladly send you the technical data sheet for the maximum possible bending capacities upon request.
• An operating manual is unfortunately no longer included in the scope of supply.
Ijdpfx Afe Akvcdoxoii
Sales and Delivery Conditions:
• Pricing: Ex Works (net, plus VAT).
• Logistics: Loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him.
• Technical specifications according to available documents. Subject to prior sale.
If you are interested or have any questions, we look forward to hearing from you to arrange a viewing appointment!
Oglas je automatski preveden. Moguće su greške u prijevodu.
Manufacturer: Curvatrice s.r.l.
Model: DS60
Type: HV
Serial Number: 050G 1182
Year of Manufacture: 2000
For sale is a reliable and immediately ready-to-use profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV. We acquired the machine second-hand in 2012 and it has been continuously and well-maintained in our possession ever since.
We would be happy to demonstrate the machine on-site after prior arrangement.
Equipment & Scope of Supply:
• Rollers: Supplied including the standard rollers shown in the pictures (suitable for flat steel and U-profiles with flanges on the inside and outside). Further profiles require corresponding special tools.
12 spacer washers approx. round 78 x 3 mm
10 spacer washers approx. round 78 x 2 mm
40 spacer washers approx. round 78 x 1 mm
• Basic equipment: Original, laterally and height-adjustable guide rollers/shafts (34 x 270 mm) are included in the scope of supply.
• Special Modification for Transport & Installation: Specially manufactured, sturdy base frame for uncomplicated transport, including four height-adjustable leveling screws for precise alignment.
• Additional Modifications: An 8 mm thick steel plate has been mounted on the top side for the possible mounting of further attachments. In addition, a subsequently attached protective plate on the feed shaft reliably protects the slides from contamination.
Operation & Control:
• Separate control panel with digital position display for the upper roller
• Hydraulic feed/adjustment of the upper roller (controlled via operating buttons)
• Practical foot pedals for the rolling direction (left/right)
• Integrated emergency stop switch
Technical Data:
• Drive: 2.6 / 3.2 kW brake motor
• Speed: 2 stages (8 and 16 RPM)
• Shaft diameter: 50 mm (all three axes hardened and ground)
• Acceptance height: 115 mm
• Dimensions (H x W x L): approx. 1,360 x 750 x 1,500 mm
• Weight: approx. 425 kg
Important Notes:
• The performance data according to the manufacturer's brochure refers to a material strength of 40 kg/mm² (depending on the respective bending radius). These values are to be understood as approximate guidelines and are not binding. We will gladly send you the technical data sheet for the maximum possible bending capacities upon request.
• An operating manual is unfortunately no longer included in the scope of supply.
Ijdpfx Afe Akvcdoxoii
Sales and Delivery Conditions:
• Pricing: Ex Works (net, plus VAT).
• Logistics: Loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him.
• Technical specifications according to available documents. Subject to prior sale.
If you are interested or have any questions, we look forward to hearing from you to arrange a viewing appointment!
Oglas je automatski preveden. Moguće su greške u prijevodu.
Dobavljač
Napomena: Registrujte se besplatno ili prijavite, za pristup svim informacijama.
Zadnje online: Danas
Registriran od: 2026
16 Oglasi online
Pošaljite upit
Telefon & Faks
+49 2556 ... oglasi
Ovi oglasi bi vas također mogli zanimati.
Uspješno
Vaša poruka je poslana.
Mali oglas
Hergensweiler
739 km
Gramofon za zavarivanje, gramofon,
ProtecW 5000
ProtecW 5000
Uspješno
Vaša poruka je poslana.
Mali oglas
Balaguer
1.394 km
100t samopodešavajući tokar za zavarivanje
OerlikonLP100
OerlikonLP100
Uspješno
Vaša poruka je poslana.
Mali oglas
Hergensweiler
739 km
Zavarivački rotacioni sto, rotacioni sto
Protec 10 ToKT 10 000
Protec 10 ToKT 10 000
Uspješno
Vaša poruka je poslana.
Mali oglas
Kirchheim unter Teck
822 km
Cilindrična brusilica - izvana
KELLENBERGERR175-1500
KELLENBERGERR175-1500
Uspješno
Vaša poruka je poslana.
Mali oglas
Écouflant
1.465 km
CNC stroj za savijanje cijevi
DAVIMCP18
DAVIMCP18
Uspješno
Vaša poruka je poslana.
Mali oglas
Ringaudai
1.298 km
Set za zavarivanje
FRONIUSPLASMA WELDING
FRONIUSPLASMA WELDING
Uspješno
Vaša poruka je poslana.
Mali oglas
Njemačka
922 km
Mašina za savijanje limova sa četiri valjka
IMCAR4RH 17/5
IMCAR4RH 17/5
Uspješno
Vaša poruka je poslana.
Mali oglas
Dortmund
1.137 km
CNC univerzalna alatna glodalica
AVIAFNE 50 N / TNC 410
AVIAFNE 50 N / TNC 410
Uspješno
Vaša poruka je poslana.
Mali oglas
Wien
491 km
Mašina za savijanje lima - 4 valjka
AKBENDAHS 30/08
AKBENDAHS 30/08
Uspješno
Vaša poruka je poslana.
Mali oglas
Ditzingen
863 km
Rezač cijevi
Orbitalum
Orbitalum
Vaš oglas je uspješno izbrisan
Došlo je do greške

























































































































