CNC tokarsko-glodački centar

DMG MORI CLX 350 V6

Technical Data

Total operating hours: 1759 h
Spindle hours: 1130 h

Control system: DMG MORI SLIMline® multi-touch control (19" / Operate SIEMENS)
Max. turning diameter: 320 mm
Max. turning length: 530 mm
Max. bar capacity: 65 mm
Travel X-axis: 242 mm
Travel Y-axis: 80 mm
Travel Z-axis: 540 mm
Max. spindle speed: 5000 rpm
Spindle drive: 16.5 kW
Machine weight: approx. 5 t
Footprint: m

Standard Equipment

Ergonomic control panel DMG MORI SLIMline®
Main spindle: A2-6 with AC motor
Drive power: 11 / 16.5 kW (100/40% duty cycle), 5000 rpm
12-station servo turret: VDI 30 mounting, with 12 driven tool stations and precise Trifix® interfaces (DIN5480 coupling)
Direct measuring system: X-, Y-axis
Chip pan
Hollow clamping device: max. bar capacity D65 mm
Sub spindle A2-5, executed as ISM 63 motor spindle with hydraulic clamping device,
Drive power: 12.6 / 16.2 kW (100/40% duty cycle), 5000 rpm
External electronic handwheel
Y-axis: +/- 40 mm
DMG MORI loTconnector

Special Equipment

- Bar package & interface includes:
- Workpiece removal device for parts up to D65 x 200 mm length, max. workpiece weight 3 kg, parts tray in front of the machine (outside work area).
- Interface for bar feeder or bar loading device (MG MORI standard interface)
- Chip conveyor, right-side discharge in place of chip tray
- 4-color signal lamp
- Hydraulic 3-jaw chuck, SMW KNCS-N 225-66 with quick-change system
- Collet chuck HAINBUCH SPANNTOP size 65
- Differential pressure clamping for sub spindle
- External chuck rinsing for sub spindle
- Automatic workpiece ejector for sub spindle with internal coolant supply for clamping device rinsing
- Hydraulic 3-jaw chuck SMWBD-175 for sub spindle

- Coolant system 5-20 bar
Option includes:
- High-pressure pump, 5-20 bar (adjustable)
- Dual cartridge filter for coolant

- Coolant spray gun 5 bar

- Pre-installation for oil mist extractor
Option only includes mechanical and electrical pre-installation for AFS 60, diameter: 200 mm

- Manual tool measurement device in working area, make: MARPOSS

- Automatic loading magazine for short bars
IEMCA KID80/16, bar capacity D65
Hfedsyuy Enspfx Ah Tjd
Material pusher D=12 mm, D=15 mm, D=21 mm, D=26 mm
Interface: DMG MORI standard
Guide rails for movement along spindle axis
Color: DMG MORI standard
Available functions for bar feeder:
- Bar feed M69
- Bar change M65
- Handshake M66

- Parts conveyor
Parts conveyor in front of the machine with left-side discharge instead of parts tray. Conveyor located outside the working area

All information without guarantee.

Oglas je automatski preveden. Moguće su greške u prijevodu.