Mašina za ocjenjivanje čvrstoće C24(C40) i TR26Dynalyse
Dynagrade
Mašina za ocjenjivanje čvrstoće C24(C40) i TR26
Dynalyse
Dynagrade
EXW fiksna cijena plus PDV
14.999 €
Stanje
Polovno
Lokacija
Kalme 

Slike prikazuju
Prikaži kartu
Podaci o mašini
- Naziv mašine:
- Mašina za ocjenjivanje čvrstoće C24(C40) i TR26
- Proizvođač:
- Dynalyse
- Model:
- Dynagrade
- Broj mašine:
- 057
- Stanje:
- vrlo dobro (rabljeno)
- Funkcionalnost:
- potpuno funkcionalan
Cijena i lokacija
EXW fiksna cijena plus PDV
14.999 €
- Lokacija:
- Kasumetsa tee, Kalme, 61002 Tartu maakond, Estonia

Pozovite
Detalji ponude
- ID oglasa:
- A17542298
- Ažuriranje:
- posljednji put 29.10.2025
Opis
New price ca 100 000.- EUR
The Dynagrade equipment is a product for on-line strength grading of structural
timber (lumber), grades from C16 until C40 (most usual is C24) and TR26 for UK market
.
It is especially suitable for installation in sawmill sorting lines or planing
mills or comparable plants where sawn (or planed) timber is transported by means
of an existing cross-conveyor system.
The grading is done with resonant frequency ("knocking" with hammer and measuring the sound frequency with microphones).
Very high productivity, can handle up to 100pc/minute (400m/min if avg. length is 4,0m).
Main prerequisites:
Limber/timber size and length 1):
Bwjdpou Dnf Isfx Abrjw
Thickness 19-110 mm, Width 60-300 mm, Length 1200-7200 mm
Sawn or planed surface
Dried lumber/timber, cut to angle
Required space: less than 1 meter (3 ft) of a transfer line with lugged chains (standard)
The Dynagrade equipment is a product for on-line strength grading of structural
timber (lumber), grades from C16 until C40 (most usual is C24) and TR26 for UK market
.
It is especially suitable for installation in sawmill sorting lines or planing
mills or comparable plants where sawn (or planed) timber is transported by means
of an existing cross-conveyor system.
The grading is done with resonant frequency ("knocking" with hammer and measuring the sound frequency with microphones).
Very high productivity, can handle up to 100pc/minute (400m/min if avg. length is 4,0m).
Main prerequisites:
Limber/timber size and length 1):
Bwjdpou Dnf Isfx Abrjw
Thickness 19-110 mm, Width 60-300 mm, Length 1200-7200 mm
Sawn or planed surface
Dried lumber/timber, cut to angle
Required space: less than 1 meter (3 ft) of a transfer line with lugged chains (standard)
Dokumenti
Dobavljač
Napomena: Registrujte se besplatno ili prijavite, za pristup svim informacijama.
Registriran od: 2024
Pošaljite upit
Telefon & Faks
+372 510 ... oglasi
Vaš oglas je uspješno izbrisan
Došlo je do greške















