Dvostruka kapma pila

emmegi Classic Magic

Emmegi
Classic Magic 500 5 Meter

Electronic double mitre saw with automatic feed of the movable cutting head, driven by a brushless motor with numerical control system. Pneumatic control of the angle adjustment in three fixed positions: 90°, 45°, and 22°30' (external), or via a mechanical system for manual adjustment of intermediate angles. Hydro-pneumatic feed of the saw blades. Swivelling heads: the rotation of the heads around the horizontal axis is performed by pneumatic cylinders, with adjustable angles ranging from 90° to 22°30' (external). Intermediate angles are set using special manually adjustable stops. The mobile units are equipped with integrated pneumatic drop-down safety devices for the working area.

Pneumatic intermediate support
The pneumatic intermediate support is particularly useful when cutting lightweight profiles of considerable length. In such cases, the pneumatic support automatically provides ideal support for the profile.

Additional clamp for profile support on roller conveyors
After each cut, the remaining short profile section tends to fall onto the roller track, posing the risk of coming into contact with the saw blade edge while the cutting phase is ongoing. This movement can potentially damage both the workpiece itself and the freshly cut section. The additional vise installed on the roller conveyor prevents this issue by securely holding the profile throughout the entire cutting operation.

Year of manufacture: 2019, as new! The saw has barely been used and protective film is still present on the printer and scales!
As the saw unfortunately does not have a cut counter, it is not possible to state exactly how many cuts have been made. However, it is immediately apparent upon inspection that the saw is virtually as new and has seen very little use. It was used by the previous owner solely for training purposes!

LCD display with backlighting
Prepared for connection of an industrial label printer
USB port
Single-cut operation
Storage for 99 profile correction values and automatic calculation of cut length for mitre cuts
Storage for 20 cutting lists entered via keyboard (50 sets each)
Storage for 10 cutting lists (100 sets each) imported from an external PC via RS232 serial interface

MACHINE FEATURES
Position detection of the movable unit via direct measuring system with magnetic tape
2 carbide-tipped saw blades, 500 mm diameter
Pneumatic full safety covers over the cutting area
2 pneumatic horizontal clamping devices with low-pressure safety system
Profile support roller conveyor
Lubrication system: mist spray device or minimum quantity spraying device
Cuts with saw blades Ø 500 mm in mitre range from 22°30' (external) to 90°
Manual profile support
Prepared for automatic start of chip extraction system MG4
Two standard profile inserts
Metric scale
Label printer incl. peel-off function
Long cut
Shortcut
Dedpfx Absw Svxle Iscc
Cross cut
Macro
Automatic cut
Software package pro

Oglas je automatski preveden. Moguće su greške u prijevodu.