Body press

Ganner Concept 70 Eco

Exhibition machine Garbsen, new, complete in standard configuration with:

- Sturdy, torsion-free steel frame, welded and bolted construction
- Upper lamella press beam with 6 elements, side lamella press beam with 5 elements
- Lamella press beams featuring proven tolerance compensation system (System Ganner) for tightly pressed carcass joints
- Counterpressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support panels
- Continuous pressing surface height of 95 mm on the lower vertical press beam
- Electromotive adjustment of both press beams via precision trapezoidal spindle screws (with increased pitch and concentricity accuracy) and high-performance recirculating nuts with grease reservoir
- Pressing is carried out electromotively, by 2 separate helical geared motors (2 x 0.75 kW)
- The pressing force of the press beams is infinitely electronically adjustable using two potentiometers and regulated via frequency converters; the pressing force control is therefore absolutely wear-free
- Pressing force for the horizontal press beam: min. 500 daN (kg) up to infinitely adjustable max. 2200 daN (kg)
Laedpoxymabofx Aayji
- Pressing force for the vertical press beam: min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg)
- Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second
- Extremely simple operation via 6 separate push buttons, 8 movement processes can be selected via the control system
- Freely adjustable pressing time preselection with automatic opening, 0–30 min (switchable to seconds or hours)
- Working height/loading height: 300 mm
- Working dimensions: length min: 150 mm, max: 2500 mm; height min: 150 mm, max: 1400 mm; depth: 700 mm
- Electrical connection: 400V, 3Ph, 50Hz (3.2 kW, 16 A)
- Weight: 2100 kg (net)
- Dimensions: 3500x1200x2300 mm (L x W x H)

Image includes special accessories: machine feet. Surcharge for rapid traverse speed per unit for fast positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams. Pressing speed: 5 / 10 / 25 mm/sec and rapid traverse speed: 50 mm/sec. Sensors can be deactivated for pressing special components.

Set of machine feet for working height 500 mm per unit.

Location: Garbsen

Oglas je automatski preveden. Moguće su greške u prijevodu.