Mašina za ivične ivice

Hebrock AKV 3006 DK - F

Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools
Jointing thickness up to 40 mm
Workpiece thickness up to 3 mm
Combined milling station radius R 2.5 mm
Technical description
With application of hot glue to the workpiece for edge material up to 3 mm
Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit
Maintenance-free, coated glue pot
HF - cross-cut station (16,000 rpm) for front and rear edge overhang
HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side
Free slots for additional processing units (system Hebrock), feed approx. 10 m/min
Cutting depth adjustment of the cross-cut saw
Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel
Double-roller top pressure beam
Aggregate viewing window from machine rear and operator side
PLC control including touchscreen
Technical data:
- Feed speed 10 m/min
- Panel thickness 8 - 40 mm
- Weight: depending on equipment approx. 1550 kg
- Dimensions (L x W x H) 5250 x 1445 x 1600 mm
2-point pneumatic cutter adjustment 1 unit
Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine
Buffing station (polishing) 1 unit
Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm
Minimum workpiece length 300 mm
Radius R 2.0 mm
Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm
Surface scraper 1 unit with pneumatic engagement control
Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change
Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool
Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance
from AKV 3005 DK-F urgently recommended
Ball bearing for corner rounding cutter 24.1mm 1 unit
Ball bearing for corner rounding cutter 24.2mm 1 unit
Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1
Itodpfx Aaexfh Tmsfor
Interchangeable spindles 1 set = 2 pieces 1 unit
1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1
Compressed air requirement: 100 - 150 l/hour.
Storage location: Nattheim

Oglas je automatski preveden. Moguće su greške u prijevodu.