Kantna lijepilica HOMAG Optimat KAL210/6/A20/S2 (2008)

HOMAG Optimat KAL210/6/A20/S2

Single-sided edge banding machine
Manufacturer: HOMAG
Type: Optimat KAL210/6/A20/S2
Year of manufacture: 2008
Single-sided machine for joint milling of
straight workpiece edges, edge banding and finishing
of various edge materials from rolls or as strips,
up to 20 mm edge thickness, in longitudinal and transverse operation.
power control PC22
Modern control system based on Windows PC
Technical data
- Feed rate 18 - 25 m/min.
- Feed rate with profile milling cutters FK11 max. 20 m/min.
- Workpiece thickness 8 - 60 mm
- Edge material strips max. 0.4 - 20 mm
Ndedpfx Ajzux R Iognsa
- Edge material rolls 0.3 - 3 mm

Joint milling unit
- 2 motors, each 3 kW, 150 Hz, 9,000 rpm.
for joint milling of the workpiece edge before edge banding
- electropneumatic control of both motors

Gluing unit A20 - 2 rollers
Quickmelt hot melt adhesive unit
- Temperature control electronically with LED display

Magazine for 1 roll, manual
- for solid edges, strips and rolls
- 1 edge feed
- 1 roll holder

Pressure zone C
- 1 driven pre-pressing roller, diameter 150 mm
- 6 after-pressing rollers, diameter 70 mm

Trimming unit HL84 / 0.8 kW
- 2 motors, each 0.8 kW, 200 Hz, 12,000 rpm.
- Motors can be manually swiveled for chamfer trimming

Pre-milling unit 1.5 kW
- 2 motors arranged one above the other, each 1.5 kW, 200 Hz, 12,000 rpm.

Profile milling unit FK11, manual
- For processing the edge overhang on the
top and bottom edges of the workpiece and for
milling the front and rear edges of the workpiece
Belt sanding unit KS 10
- for sanding straight and solid wood edges,
oscillating,
sanding pressure manually adjustable
Profile sanding unit PS 10
- sanding from below,
for sanding profiles,
sanding pressure manually adjustable
Automation package Chamfer / Radius KAL210/6/A20
- Automatic adjustment of the infeed fence
- Automatic adjustment of the pressure zone
- Pneumatic adjustment from chamfer to straight trimming
- Pneumatic adjustment of the trimming motors for flush or overhang trimming
- Pneumatic adjustment of the pre-milling unit for flush or overhang milling
- Automatic adjustment from chamfer to radius milling during profile milling
- Pneumatic adjustment PN10 / FA11
- Electronic height adjustment

Oglas je automatski preveden. Moguće su greške u prijevodu.