Kantirni strojIMA
COMBIFORM/K/I/R75/1035/V/R3
Osnovni podaci
- Naziv mašine:
- Kantirni stroj
- Proizvođač:
- IMA
- Model:
- COMBIFORM/K/I/R75/1035/V/R3
- Godina proizvodnje:
- 1998
- Stanje:
- polovno
Tehnički detalji
pružanje
- Lokacija:
- Piemonte, Italija
– Udaljenost: cca 797 km
- Dostupnost:
- odmah nakon završetka aukcije
- Uvjeti isporuke:
- FCA
3.500,00 € (obavezno)
besplatno
Opis
TECHNICAL DETAILS
Feed speed: max. 25 m/min
Edge thickness: max. 3 mm
Panel thickness: min. 14 mm
Panel thickness: max. 55 mm
Panel length: min. 350 mm
Number of panel sizing and milling units: 3
Panel sizing and milling unit 1
Motor power: 7.5 kW
Speed: 18,000 rpm
Panel sizing and milling unit 2
Motor power: 7.5 kW
Speed: 18,000 rpm
Panel sizing and milling unit 3
Motor power: 7.5 kW
Speed: 18,000 rpm
Number of edge-processing units: 3
End-trimming unit
Number of motors: 2
Motor power: 0.22 kW
Speed: 17,250 rpm
Fine milling unit for flush trimming and rounding
Motor power: 1.5 kW
Speed: 8,600 rpm
Buffing unit
Number of motors: 2
Motor power: 0.18 kW
Speed: 1,375 rpm
EQUIPMENT
Thin-edge processing
Thick-edge processing
EVA hot-melt adhesive system
Pressure system with rubber belts
Panel alignment system at the infeed
3 milling/roughing units with NC-controlled positioning
End-trimming unit
Fine milling unit for flush trimming and rounding with NC-controlled positioning
Buffing unit
Edge coil magazine with 2 positions
Glue pot for EVA hot-melt adhesive
Set of pressure rollers with 4 pressure rollers
NC-controlled positioning of the pressure rollers
Spraying unit
CE marking
The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installing, securing and operating the machine at the destination.
External reference: 3944
Oglas je automatski preveden. Moguće su greške u prijevodu.
Obrada plaćanja
- Dodatni troškovi kupovine:
- 18 %
- Uvjeti plaćanja:
- 100 % avansno plaćanje
- Način plaćanja:
Bankovni transfer
Detalji ponude
- ID oglasa:
- A23304828
- Referentni broj:
- AUC-2611348
- Ažuriranje:
- posljednji put 10.11.2026
- Ekskluzivna ponuda:
- dostupno samo na aukciji
razgledavanje
Piemonte BRANDTKDF 660 GC
Piemonte SELCOEBTR 120 TWIN PUSHER
Piemonte BIESSESKIPPER 130
Piemonte BIESSEROVER C 6.40
Piemonte DMCUNISAND K-I
Piemonte BIESSEROVER G 714
Piemonte SELCOWNA 610 TWIN PUSHER
Piemonte BRANDTKDF 350 C
Piemonte STEFANIPERFORMANCE SB
Piemonte HOMAGKAL 310/7/A20/S2
Piemonte PACKSIZE-EMSIZEFM 6
Piemonte BIESSEAKRON 1330
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-pečat povjerenja
Što je pečat povjerenja?
Machineseeker certificira odabrane prodavače s povjerenjem Machineseeker. Prije odobrenja, iskusni Machineseeker zaposlenici provode standardiziranu i temeljitu provjeru.
Šta provjeravamo?
Provjera
obrtnice ili izvatka iz trgovinskog registra
Provjera
poštanske adrese prodavača
Validacija
bankovne veze
Potvrda
telefonske
dostupnosti glavnog broja
Ekonomska informacija
ne smije sadržavati negativne karakteristike
Žalbe kupaca
mogu dovesti do oduzimanja oznakeŠta to znači za vas kao kupca?
Zahvaljujući Machineseeker pečatu povjerenja, kao kupac možete prepoznati pouzdane prodavače bez vlastite provjere, koji s velikom vjerovatnoćom vode pošten i ispravan posao.
Naravno, tokom procesa kupovine ipak mogu nastati nesuglasice. Machineseeker nije odgovoran za pravne prekršaje aktivnih kupaca ili prodavača na Machineseeker.