Mašina za bušenje tiplova

Koch Sprint PTP3-L

Used Koch Drilling and Dowel Insertion Machine, Sprint-PTP-3

Technical data of the machine:
Workpiece dimensions:
Length Y: 110-800mm
Width X: 20-1200mm
Thickness Z: 14-60mm

Material: Chipboard/MDF/Softwood
Machine with 2 working areas. 2 workpieces with a maximum width of 600mm each can be loaded independently of each other.
Working height 900mm

- with horizontal drilling station
- with glue application and dowel insertion station
- with 1 oscillating conveyor
- Drilling distance vertically Z above the support table: 35 mm
- 1 stop rail on the left and right
- Mechanical digital displays for height adjustment
- Work cycle triggered by a manual button

Fpodpfx Amjzbunksxsh
Koch Numeric with 1 NC axis (X)
Positioning control with PC (Windows XP Professional PC)

Including widened machine frame for a maximum workpiece width of 1200mm
2 additional workpiece clamping cylinders
Center stop for 4 working areas (removable for wide workpieces)

Horizontal drilling station with 1 drilling spindle:
Max. drilling depth 28mm
Drill chuck Ø10mm
Total drill length 70mm
Drill speed 7200 rpm
With dowel hole blow-out

Glue application and dowel insertion station
Dowel diameter: 8mm
Dowel length 30mm
Dowel projection 7-14 mm
Set to 11mm
Tolerance for wood dowels:
--- Dowel length +/- 1 mm
--- Dowel diameter +0.1/-0.2 mm

With electronic glue monitoring (ELC)
A monitoring device is installed before the glue valve, which measures the glue flow during each work cycle. If no glue is injected at a valve, the machine interrupts its work cycle and displays the corresponding glue valve in the control cabinet.

Electrical values:
Connection value: 400V, 50 Hz, 3 phases
Voltage fluctuations max +6% to 10%
Air connection
1 x R 1/2" internal thread
7 bar

Extraction air velocity: approx. 30m/sec

Oglas je automatski preveden. Moguće su greške u prijevodu.