Konzolni regal posebna stavka!

Kragarmregal einseitig mit Dachträger Höhe 4,2 m / Tiefe 1,2 m / Länge 11,5 m

Cantilever rack with roof girder: hot-dip galvanized bolted system

Scope of delivery:
7 shelf uprights height 4,200 mm with foot section useful depth 1200 mm
21 cantilever arms with 1,200 mm useful depth, standard
7 roof girders with 1,500 mm projection pre-drilled for on-site roof construction
(*Without wooden purlins and trapezoidal sheets for roof superstructure)
Including longitudinal and diagonal bracing for 1,900 mm stud spacing
Incl. fastening material (without ground anchors)

- (*Delivery time approx. 1 week)
- (*No damaged parts!)
- (*Spare parts can be reordered and extended at any time)
- (*Offer available in larger quantities: approx. 50 stands in stock)

Detailed description:
- Stable steel construction made of IPE profiles
- Surface of all components hot-dip galvanized
- Load capacity per upright 3,850 kg (minus local wind and snow load)
- Load capacity per cantilever 900 kg
- Load capacity per roof girder 885 kg with 1,500 mm roof projection
- Cantilever arms height adjustable in 100 mm increments
- 3 screwable cantilever arms per upright with depth 1,200 mm, standard
= 4 storage levels on top of each other
- Including longitudinal and diagonal bracing with 1,900 mm center distance
- Shelf length: 11.500 mm
- Including fixing material (without floor anchors)
- With assembly instructions and load plates C4 according to DIN standard

- Technical advice by telephone
- Made in Germany
- Short delivery time
- On-site pickup possible

Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with notification before delivery.
The material is packed sensibly to allow easy unloading.

Gox2yen
In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load.
The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer.

The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended.
According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Oglas je automatski preveden. Moguće su greške u prijevodu.