Mašina za spajanje furnira

Kuper FWS 1250

For joining veneers with thicknesses ranging from approximately 0.3 to 3.0 mm. The machine uses a special glue thread, which is applied in a zigzag line over the joint. High adhesion and tensile strength ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is embedded internally, thus eliminating the need for sanding the adhesive medium.

Specific features:

* Torsion-resistant C-frame design made of steel
* Stainless steel worktable
* Standard heating system
* SP control system
* Pneumatically regulated adhesive pressure
* Disc wheel system with tolerance compensation for various veneer thicknesses
* Adjustable heating performance for both idle and processing modes
* Tool-free adjustment of the adhesive pressure roller
* Fully automatic start/stop function via photoelectric sensor

Technical data:
Godpfx Aoxdxccodnjil

Throat depth: 1250 mm
Feed: 4 speeds, approx. 15, 30, 45, 60 m/min
Veneer thickness: approx. 0.3 – 3.0 mm
Operating voltage: 400 V, 50 Hz, 3 phase
Compressed air connection: R 1/4''
Compressed air consumption: approx. 7 NL/min
Total connected load: approx. 3.1 kVA

Standard accessories:

1 test spool of original KUPER glue thread type 1220
10 threaders 103071
1 kg release agent 105661
1 set of tools, 1 operating manual

Glue thread offers available upon request!

Art. No. 0149650

Oglas je automatski preveden. Moguće su greške u prijevodu.