Presa za briketiranje materijala za zapošljavanje

mütek MAP 750

Used machine, good condition.
Delivery time appr. 16 weeks after ordering

Basic machine starts at 139.700 € net
*Options at additional cost, see below

Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made

Technical specifications:
Throughput capacity up to a maximum of 750 kg/h (depending on the material)
(e.g. sawdust with a bulk density of 250 kg/qbm)
An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material.

Goods tariff number: 84793010
Briquette Ø 65 mm
including 2 m press channel
Engine power main engine 37 kw
Feed screw geared motor 2.2 kw
Compressor screw 5.5 kw
Hydraulic pump motor 0.37 kw
Total connection value: approx. 47 kW
Control panel with plain text display for operating states
and utilization indicator for the main drive and feed screws
PLC control with operating hours counter in the control cabinet
Machine has CE mark
Automatic start-stop function
Dimensions 3100x860x1800 mm lxwxh
Weight 3800kg

Options at extra cost:

Temperature control unit for the pressing tools
to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat
Fjdpfefmqq Eex Aiyepg
Wired ready for connection - absolutely necessary for operation
including the corresponding control + €7,850 net

guillotine or pill crusher,
for cutting the briquettes to length + €6,900 net
Necessary for compressed air connection!

Silo for MAP series + €19,940 net
- Storage silo above the machine -
Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator.

Transport line / cooling section (nominal value: 4x2m)
each 2 meters 990 euros net

Control System
4.995 € net

Assembly / commissioning (nominal value approx. 2-3 days on site)
according to expenditure on proof against separate calculation. The following sentences apply:
Service technician/mechatronics technician per hour of assembly and travel: €129.00
Overtime: 25% surcharge
50% surcharge for each Saturday and night hour
100% surcharge for each Sunday and holiday hour
Release per mechanic per day: depends on the country
Per car and van and driven kilometer: 0.98 € / km
Arrival and accommodation against receipt or flat rate billing at the expense of the client.
.
Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net
.
Raw material requirements:
- The moisture content (atro) must be between at least 6 and a maximum of 15%
- Maximum chip length 18 mm
- Installation temperature: room with a temperature of at least +5°C
- The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear