Automatska bušilica za okrugle cijevi, pravokutne cijevi itd
Kudu mit NC-Steuerung
Automatska bušilica za okrugle cijevi, pravokutne cijevi itd
Kudu mit NC-Steuerung
Godina proizvodnje
2026
Stanje
Novi
Lokacija
Bopfingen 

Osnovni podaci
Cijena i lokacija
- Lokacija:
- Gewerbehof 27, 73441 Bopfingen, Deutschland

Pozovite
Detalji ponude
- ID oglasa:
- A4745802
- Referentni broj:
- Bohrautomat Kudu mit NC-Steuerung
- Ažuriranje:
- posljednji put 02.04.2026
Opis
Kudu automatic drilling machine with NC control and manual tool change (3-axis) automatic drilling machine with a mobile processing unit - the table remains stationary, the drilling head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The system is programmed directly on the machine control. The system is very robust and consists of proven machine components.
Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Stable machine base • Drilling head speed: up to 2800 rpm • Tool holder: HSK 50 • Drive of the X, Y and Z axis via servomotors • Rapid traverse in the X Axis: 18 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance between the top edge of the table and the bottom edge of the tool holder 245 mm • Table width 450 mm • Working height: 1005 mm • Drilling diameter: 3 to 15 mm in St. 50 (depending on the tool) • Machining path in the Y-axis: 230 mm • Tolerance in the X-axis: +- 0.1 mm/m • Tolerance in the Y-axis: +- 0.05 mm • Tolerance in the Z-axis: +- 0, 05 mm • System weight: 2000 kg • System dimensions: 8000 mm x 2000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Simple programming of the machine • Cooling takes place by means of a minimum quantity spray system • Without material clamping vices • Digital hand wheel
Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming and operation
It is always possible for you to inspect the desired system in our production/demonstration hall.
Ksdpfx Aefu Iwmsnlend
Please do not hesitate to contact us.
Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Stable machine base • Drilling head speed: up to 2800 rpm • Tool holder: HSK 50 • Drive of the X, Y and Z axis via servomotors • Rapid traverse in the X Axis: 18 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance between the top edge of the table and the bottom edge of the tool holder 245 mm • Table width 450 mm • Working height: 1005 mm • Drilling diameter: 3 to 15 mm in St. 50 (depending on the tool) • Machining path in the Y-axis: 230 mm • Tolerance in the X-axis: +- 0.1 mm/m • Tolerance in the Y-axis: +- 0.05 mm • Tolerance in the Z-axis: +- 0, 05 mm • System weight: 2000 kg • System dimensions: 8000 mm x 2000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Simple programming of the machine • Cooling takes place by means of a minimum quantity spray system • Without material clamping vices • Digital hand wheel
Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming and operation
It is always possible for you to inspect the desired system in our production/demonstration hall.
Ksdpfx Aefu Iwmsnlend
Please do not hesitate to contact us.
Dobavljač
Napomena: Registrujte se besplatno ili prijavite, za pristup svim informacijama.
Posljednji put online: prošle sedmice
Registriran od: 2017
44 Oglasi online
Pošaljite upit
Telefon & Faks
+49 7362 ... oglasi
Ovi oglasi bi vas također mogli zanimati.
Uspješno
Vaša poruka je poslana.
Mali oglas
Hessisch Lichtenau
1.006 km
Inverterski izvor napajanja za orbitalni aparat za zavarivanje, aparat za zavarivanje + vodeno hlađe
MESSER GRIESHEIM - POLYSOUDEPS 204 + RC 200
MESSER GRIESHEIM - POLYSOUDEPS 204 + RC 200
Uspješno
Vaša poruka je poslana.
Mali oglas
Großenlüder
964 km
Pjeskarska stanica sa 5 godina garancije
Oliver Fritz GmbH & Co. KGStrahlcontainer 40Fuß 9m Strahlraum
Oliver Fritz GmbH & Co. KGStrahlcontainer 40Fuß 9m Strahlraum
Uspješno
Vaša poruka je poslana.
Mali oglas
Rödermark
951 km
Electric hydr. Univerzitet centar savijanja
INDUMASCHV 15
INDUMASCHV 15
Uspješno
Vaša poruka je poslana.
Mali oglas
Rödermark
951 km
Brza radijalna mašina za bušenje
DONAUDR 28 Z
DONAUDR 28 Z
Uspješno
Vaša poruka je poslana.
Mali oglas
Berlin
1.005 km
PRESS BRAKE
DarleyEHP 200 43/37
DarleyEHP 200 43/37
Uspješno
Vaša poruka je poslana.
Mali oglas
Rödermark
951 km
Mašina za koordinatno bušenje
IXION MAXIONKT2-1300.1ST
IXION MAXIONKT2-1300.1ST
Uspješno
Vaša poruka je poslana.
Mali oglas
Metzingen
825 km
Kružna pila
EISELEVMS 370
EISELEVMS 370
Uspješno
Vaša poruka je poslana.
Mali oglas
Hergensweiler
739 km
Okretni sto za zavarivanje, rotacioni sto, pozicioner
Schweissdrehtisch Protec höhenverstellbaKT 300H,170-4
Schweissdrehtisch Protec höhenverstellbaKT 300H,170-4
Uspješno
Vaša poruka je poslana.
Mali oglas
Langwedel
1.192 km
Hladna kružna testera
Berg & SchmidVKS 370 HA
Berg & SchmidVKS 370 HA
Uspješno
Vaša poruka je poslana.
Mali oglas
Wiesbaden
993 km
Stezna glava
FORKARDTUVE 200-50/200
FORKARDTUVE 200-50/200
Vaš oglas je uspješno izbrisan
Došlo je do greške











































































































