RANDEK SP700 pila za sjeckanje
RANDEK SP700 pila za sjeckanje
VB plus PDV
13.900 €
godina proizvodnje
1989
Stanje
Polovno
Lokacija
66140 Malax, Finnland 

Slike prikazuju
Prikaži kartu
Podaci o mašini
Cijena i lokacija
VB plus PDV
13.900 €
- Lokacija:
- Paxalvägen 39, 66140 Övermalax, FI
Pozovite
Detalji ponude
- ID oglasa:
- A7897556
- ažuriranje:
- posljednji put 19.10.2024
Opis
RANDEK SP700 cut saw
manufacture Randek Sweden
Year 1989
SN 1989-02-08
in good condition, cleaned and checked
Randek’s SP700 series provides reliable cut saws that are a major asset to roof
Iiodpfx Asivaryeaqoh
truss and house producers around the world.
The SP700 cut saw is effective, easy-to-use and accurate. It has been on the
market for a long time and is continuously improved in close contact with our
many customers. The blade on this semi-automatic saw supports angled cuts,
which mean it can make any cuts you may require.
You can also use the large diameter blade (700mm ) to cut several sections of stacked timber
simultaneously.
• Angled cuts from 0° to 360°
• Cut heights up to 250 mm, possible to cut three boards each cutting cycle
• PLC programmable saw
• Fixation of timber near the cutting area resulting in accurate cutting
roller conveyor system with 5 adjustable pneumatic stoppers . Length 6,25m
out feeding roller conveyor 4,10m
Complete line: 11,5m
technical information under subject of correction
manufacture Randek Sweden
Year 1989
SN 1989-02-08
in good condition, cleaned and checked
Randek’s SP700 series provides reliable cut saws that are a major asset to roof
Iiodpfx Asivaryeaqoh
truss and house producers around the world.
The SP700 cut saw is effective, easy-to-use and accurate. It has been on the
market for a long time and is continuously improved in close contact with our
many customers. The blade on this semi-automatic saw supports angled cuts,
which mean it can make any cuts you may require.
You can also use the large diameter blade (700mm ) to cut several sections of stacked timber
simultaneously.
• Angled cuts from 0° to 360°
• Cut heights up to 250 mm, possible to cut three boards each cutting cycle
• PLC programmable saw
• Fixation of timber near the cutting area resulting in accurate cutting
roller conveyor system with 5 adjustable pneumatic stoppers . Length 6,25m
out feeding roller conveyor 4,10m
Complete line: 11,5m
technical information under subject of correction
Dobavljač
Napomena: Registrujte se besplatno ili prijavite, za pristup svim informacijama.
Registriran od: 2007
Pošaljite upit
Telefon & Faks
+49 176 6... oglasi
Vaš oglas je uspješno izbrisan
Došlo je do greške