Vertikalni obradni centar

Mazak VTC-20C

Vertical Machining Center Mazak VTC-20C

The machine is in fully operational condition and has undergone comprehensive service maintenance. You are welcome to inspect it.
In 2025, the spindle of the MAZAK VTC-20C was overhauled.

Please find some key details from the technical specification below. If you require any additional information, please do not hesitate to ask.

Specification | Value
---|---
X-axis travel | 1,660 mm
Y-axis travel | 510 mm
Z-axis travel | 510 mm
Distance from table surface to spindle nose | 180–690 mm
Distance from column front to spindle centerline | 550 mm
Working table area | 2,000 × 510 mm
Maximum table load (uniform load) | 1,000 kg
Spindle speed | 40–7,000 rpm
Spindle motor power – 10 min rating | 11 kW
Spindle motor power – 30 min rating | 7.5 kW
Spindle motor power – continuous | 5.5 kW
Spindle taper | 7/24 taper No. 40
X-axis rapid traverse | 24,000 mm/min
Y-axis rapid traverse | 24,000 mm/min
Gbodpfevurd Eox Am Asu
Z-axis rapid traverse | 20,000 mm/min
X-axis cutting feed rate | 1–5,000 mm/min
Y-axis cutting feed rate | 1–5,000 mm/min
Z-axis cutting feed rate | 1–5,000 mm/min
Tool magazine capacity | 24 tools
Tool selection system | Tool holder No. fixed-address system (automatic short-cut system)
Tool shank | NT-40
Pull stud bolt | Yamazaki-made ANSI type
Maximum permissible tool diameter | Ø80 mm
Maximum tool diameter with adjacent pocket empty | Ø110 mm
Maximum permissible tool length | 350 mm (from gauge line)
Maximum permissible tool weight | 8 kg (including tool shank and pull stud bolt)
Maximum total tool weight in magazine | 96 kg (average 4 kg × 24 tools)
Machine weight | 7,215 kg
Machine height from floor | 2,701 mm
Required floor area | 4,000 × 2,990 mm

Oglas je automatski preveden. Moguće su greške u prijevodu.