CNC centar za struganje i glodanje

MORI SEIKI NZ 2000 T3Y2 & Lehmann-Robot

Technical details:

standard turning dia.: 200
turning length: max. 810 mm
control: MSX-701 MAPPS IV
greates pass round over bed: 800 mm
Max. distance between centres: 1130 mm
Lhedpsy S Tm Usfx Adyeg
max. turning diameter: 320 mm
max. workpiecediameter: 300 mm
bar material dia.: 65 mm
Traverse X-Axis 1: 210
Traverse X-Axis 2: 210 mm
Traverse X-Axis 3: 210 mm
Traverse Y-Axis 1: 110 (+65/-45) mm
Traverse Y-Axis 2: 110 (+45,/-65) mm
Traverse Z-Axis 1: 300 mm
Traverse Z-Axis 3: 300 mm
Traverse Z-Axis 2: 810 mm
Traverse B-Axis: 870 mm
turning speed range - spindle: 5.000 1/min
Number of spindle speed ranges: 2 .
spindle nose: JIS A2-6
spindle bore: 73 mm
spindle bearing diameter: 120 mm
C-Axis: 0,001 °
turning speed range - spindle: 5.000 1/min
spindle nose: JIS A2-6
spindle bore: 73 mm
bar material dia. max: 65/52 mm
spindle bearing diameter: 120 mm
C-Axis: 0,001 °
Number of Turrets: 3 .
Number of tool stations: 16 x 3=48 pos
Schank height for square tool: 20 mm
Diameter of boring bar: 32 mm
turret changing time (4-stations): 0,18 sec
Number of driven tools: 16 x 3=48 pos
max. spindle speed driven tools: 6.000 U/min.
Rotary tool machining ability: M16 / Ø16 .
rapid traverse X-axis: 30 m/min
rapid traverse Y-axis: 20 m/min
rapid traverse Z-axis: 50 m/min
drive capacity - spindle motor: 25 / 22 kW
power capacity - driven tools: 7,5 / 5,5 kW
total power requirement: 92,7 kVA
weight of the machine ca.: 9,4 t
dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m

Accerories

Chip conveyor
Coolantsystem
C-axis in main and sub spindle
Y-axis 2 x
part counter
total counter
tool setting
Overhead partsgripper with conveyor belt.
Spindle 1 Chuck SMW KNCS-N 210 / 52 mm
Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65
Robot interface
Lehmann Robot with parts belt for feeding and disposal

CNC Turning- and Milling Center
MORI SEIKI NZ 2000 T3Y2

The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets.
For shaft parts loading and unloading there is a Lehmann Robot conveyor belts for loading and unloading.
The machine can also be sold without robot.

*