Preša za briketiranjeNestro
NBP C 150
Preša za briketiranje
Nestro
NBP C 150
godina proizvodnje
2019
Stanje
Polovno
Lokacija
Njemačka 

Slike prikazuju
Prikaži kartu
Podaci o mašini
- Naziv mašine:
- Preša za briketiranje
- proizvođač:
- Nestro
- Model:
- NBP C 150
- godina proizvodnje:
- 2019
- Stanje:
- polovno
Cijena i lokacija
- Lokacija:
- D - Hessen

Pozovite
Detalji ponude
- ID oglasa:
- A19798295
- Referentni broj:
- ISS20250819-5453
- ažuriranje:
- posljednji put 20.08.2025
Opis
Used machine
Identical in construction to Weima C 150
Year of manufacture: 2019
1845 operating hours
Equipment and technical data:
Drive power: 5.5 kW
Briquette diameter: 50 mm
Hydraulic oil capacity: 160 l
Throughput capacity: up to 50 kg/h (depending on material)
Connection rating: 400 V +/- 5% / 50 Hz
Includes:
Press mechanism with filling cylinder, main cylinder, clamping cylinder
Connection part for transport line
Chromed clamp
Hydraulic tank 160 l with pump motor + valve control
Safety switch for oil temperature
Control cabinet and electrical control system
Briquette length monitoring
Nlodpfx Asw Rhk Dsfljh
Automatic end position for all cylinders
Manual control
Automatic "On/Off" with level limit switch
Material: shavings, sawdust from solid wood, loose, clean and free from contaminants*
Maximum dimensions: 10 mm
Throughput performance: approx. 50 m³/year/
* Contaminant specification: Everything except wood, wood pieces larger than 15 mm.
The throughput capacity is highly dependent on the material. Stated values are averages. May vary depending on mix ratio, moisture content, and material characteristics!
Application case not known or not fully specified. Machine is being sold appropriately and solution-oriented by a specialist dealer.
With oil cooler or water cooling; ensure adequate ventilation for the press/unit/oil cooler.
In case of heat build-up, operating time may be drastically reduced due to increased temperature.
With new press clamp
Availability: by arrangement
Location: Flörsheim
Oglas je automatski preveden. Moguće su greške u prijevodu.
Identical in construction to Weima C 150
Year of manufacture: 2019
1845 operating hours
Equipment and technical data:
Drive power: 5.5 kW
Briquette diameter: 50 mm
Hydraulic oil capacity: 160 l
Throughput capacity: up to 50 kg/h (depending on material)
Connection rating: 400 V +/- 5% / 50 Hz
Includes:
Press mechanism with filling cylinder, main cylinder, clamping cylinder
Connection part for transport line
Chromed clamp
Hydraulic tank 160 l with pump motor + valve control
Safety switch for oil temperature
Control cabinet and electrical control system
Briquette length monitoring
Nlodpfx Asw Rhk Dsfljh
Automatic end position for all cylinders
Manual control
Automatic "On/Off" with level limit switch
Material: shavings, sawdust from solid wood, loose, clean and free from contaminants*
Maximum dimensions: 10 mm
Throughput performance: approx. 50 m³/year/
* Contaminant specification: Everything except wood, wood pieces larger than 15 mm.
The throughput capacity is highly dependent on the material. Stated values are averages. May vary depending on mix ratio, moisture content, and material characteristics!
Application case not known or not fully specified. Machine is being sold appropriately and solution-oriented by a specialist dealer.
With oil cooler or water cooling; ensure adequate ventilation for the press/unit/oil cooler.
In case of heat build-up, operating time may be drastically reduced due to increased temperature.
With new press clamp
Availability: by arrangement
Location: Flörsheim
Oglas je automatski preveden. Moguće su greške u prijevodu.
Dobavljač
Napomena: Registrujte se besplatno ili prijavite, za pristup svim informacijama.
Registriran od: 2008
Pošaljite upit
Telefon & Faks
+49 6146 ... oglasi
Vaš oglas je uspješno izbrisan
Došlo je do greške













