Ekstruzer za reciklažuNext Generation Recyclingmaschinen GmbH
F:Gran 145-20
Ekstruzer za reciklažu
Next Generation Recyclingmaschinen GmbH
F:Gran 145-20
EXW fiksna cijena plus PDV
150.000 €
Godina proizvodnje
2013
Stanje
Polovno
(ograničena funkcionalnost)
Lokacija
Bergen op Zoom 

Podaci o mašini
- Naziv mašine:
- Ekstruzer za reciklažu
- Proizvođač:
- Next Generation Recyclingmaschinen GmbH
- Model:
- F:Gran 145-20
- Broj mašine:
- 12090
- Godina proizvodnje:
- 2013
- Stanje:
- potrebna popravka (korišteno)
- Funkcionalnost:
- ograničena funkcionalnost
- Radni sati:
- 7.700 h
Cijena i lokacija
EXW fiksna cijena plus PDV
150.000 €
- Lokacija:
- Bergen op Zoom, Nizozemska

Pozovite
Detalji ponude
- ID oglasa:
- A22402837
- Referentni broj:
- Z032
- Ažuriranje:
- posljednji put 23.07.2026
Opis
This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago.
Installed power approx.: 474 kW
Cooling water requirement approx.: 190 l/min
Fresh water consumption approx.: 110 l/h
Feeding system:
• Diameter of the feeding screw: 200 mm
• Drive for the feeding screw: 45 kW, frequency-controlled
• Hopper capacity net 7 m³/250 ft³,
• Gear motor 3 × 3 kW
• 2 sight glasses in the hopper
• 2 level indicators
Extruder:
• Diameter of the extruder screw: 145 mm
• L/D ratio: 24
• Heating power: 50 kW
• Extruder drive unit 280 kW
Vacuum 1:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 11 kW
• Vacuum capacity: 225 m³/h
• Vacuum pressure: 33 mbar
Vacuum 2:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 7.5 kW
• Vacuum capacity: 190 m³/h
• Vacuum pressure: 33 mbar
Cylinder:
• Cylinder: Bimetal extruder cylinder,
• Reinforcement layer 1.8–2.0 mm thick,
• Hardness 63–65 HRC
Installation conditions:
• Voltage: 3 × 400 Volts
• Permissible fluctuation max.: +5 % – 5 %
• Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 %
• Protective measure: Multiple grounding
• Ambient temperature: min. 15 °C, max. 35 °C
• Humidity max.: 90 %
Ncjdpfx Asznz Ezjhhow
• Altitude of the installation site: 0 – 1000 m
The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe.
The details for optimal transport need to be clarified. The machine price is without packaging.
Oglas je automatski preveden. Moguće su greške u prijevodu.
Installed power approx.: 474 kW
Cooling water requirement approx.: 190 l/min
Fresh water consumption approx.: 110 l/h
Feeding system:
• Diameter of the feeding screw: 200 mm
• Drive for the feeding screw: 45 kW, frequency-controlled
• Hopper capacity net 7 m³/250 ft³,
• Gear motor 3 × 3 kW
• 2 sight glasses in the hopper
• 2 level indicators
Extruder:
• Diameter of the extruder screw: 145 mm
• L/D ratio: 24
• Heating power: 50 kW
• Extruder drive unit 280 kW
Vacuum 1:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 11 kW
• Vacuum capacity: 225 m³/h
• Vacuum pressure: 33 mbar
Vacuum 2:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 7.5 kW
• Vacuum capacity: 190 m³/h
• Vacuum pressure: 33 mbar
Cylinder:
• Cylinder: Bimetal extruder cylinder,
• Reinforcement layer 1.8–2.0 mm thick,
• Hardness 63–65 HRC
Installation conditions:
• Voltage: 3 × 400 Volts
• Permissible fluctuation max.: +5 % – 5 %
• Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 %
• Protective measure: Multiple grounding
• Ambient temperature: min. 15 °C, max. 35 °C
• Humidity max.: 90 %
Ncjdpfx Asznz Ezjhhow
• Altitude of the installation site: 0 – 1000 m
The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe.
The details for optimal transport need to be clarified. The machine price is without packaging.
Oglas je automatski preveden. Moguće su greške u prijevodu.
Dokumenti
Dobavljač
Napomena: Registrujte se besplatno ili prijavite, za pristup svim informacijama.
Posljednji put online: prošle sedmice
Registriran od: 2026
15 Oglasi online
Pošaljite upit
Telefon & Faks
+43 660 2... oglasi
Vaš oglas je uspješno izbrisan
Došlo je do greške


























