Cilindrična mašina za mljevenje

Schaublin UG400

Schaublin UG400 universal grinding machine
Year: 2013
NEW, used only a few hours.

Height of centers 100mm
Distance between centers 400 mm
Maximum table travel 425mm
Travel speed (stepless)
0.05-5 m/min
Minimum stroke 2 mm
Table rotation
- towards the spindle 30 degree
- away from the spindle 3 degree
Delay in reversal 0-10sec
Handwheel movement of manual feed 15 mm
Spindle rotation range 0-90 degree
Spindle speed (stepless) 100-1000 rpm
Spindle cone 4 Morse
Collet chuck diameter 25 mm
Engine power 0.2-0.37 kW
Chuck diameter (standard) 125 mm
Maximum workpiece weight without using tailstock 30 kg
Maximum torque 300 kg/cm
Maximum workpiece weight between centers 60 kg
Grinding wheel size (outer diameter x width x inner diameter)
350x50x127 mm
Minimum grinding wheel diameter 280 mm
Grinding wheel motor power 3.7 kW
Ndsdpfx Afow Tmidslsc
Insertion feed system
Fast approach 40 mm
Additional adjustment 200 mm
Feed rate by diameter (roughing) 0.015-6 mm/min
Feed rate (finishing) 0.015-3 mm/min
Minimum increment of feed by diameter 0.001 mm
Tailstock Quill cone 3 Morse
Moving the quill 25 mm
Fine tuning range 0-0.040 mm
Internal grinding spindle
Maximum speed of rotation of the spindle 28000rpm
Maximum possible spindle size 100mm


Accessories/options:

Internal grinding spindle 28000 rpm, Fischer
Coolant tank paper filter type
Grinding wheels
Grinding flanges
Taolstock
Digital readout system
Balancing arbor
Hand tools
Etc...


Under power in our warehouse, ready for inspection.