Mašina za prešanje i falcanjeSchechtl
MAF 400/CNC
Mašina za prešanje i falcanje
Schechtl
MAF 400/CNC
Godina proizvodnje
2027
Stanje
Novi
Lokacija
Kalina Wielka 

Osnovni podaci
- Naziv mašine:
- Mašina za prešanje i falcanje
- Proizvođač:
- Schechtl
- Model:
- MAF 400/CNC
- Godina proizvodnje:
- 2027
- Stanje:
- novo
Cijena i lokacija
- Lokacija:
- Kalina Wielka 62 E, 32-218 Kalina Wielka, Polska

Pozovite
Detalji ponude
- ID oglasa:
- A20762817
- Ažuriranje:
- posljednji put 19.11.2026
Opis
Efficient, quiet, and powerful mechanical machine
Technical specifications:
Working length: 4040 mm
Total length: 5352 mm
Depth: 2232 mm
Working height: 950 mm
Total height: 1924 mm
Weight: 5,000 kg
Knjdpox Hyhbjfx Anljd
Maximum bending thicknesses:
Steel: 1.5 mm
Aluminum: 2.00 mm
Stainless steel: 1.00 mm
Copper: 2.00 mm
Galvanized sheet: 3.00 mm
Standard equipment:
• 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam
• 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam
• Foot switch (MAF 400/CNC model delivered with a second foot switch)
• Soft start for the bending beam
• Electrically driven back gauge, 8-1000 mm
• 5 m power cable with 32 A mains plug (EU version)
• Supply voltage: 3 x 400 V, 50 Hz (EU version)
CNC S-Touch control:
From profile concept to bending precision in record time
Standard features at no extra charge:
• Graphical display of the bending sequence for the selected program
• Graphical representation of sheet position before every bend
• Operator guidance – each work step visually explained via the graphic control system
• Programming without submenus
• Profile correction by direct touch in the desired section of the profile
• Programmable angle correction
• Set repeat cycles for special radius arcs
• Cutting program for RSL rotary shears
• Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges
• Profile search possible by name, sketch selection, and profile drawing on the touchscreen
• 21.5-inch LCD touchscreen with best-in-class graphics
• USB port for program backup and transfer
• Non-volatile memory for over 3,000 programs
• Freely assignable program names (profile names)
• Registration of produced quantities and machine operating time
• 16 languages
• Remote support (Team Viewer)
• Soft start for bending beam
• Back gauge with drive, 6-1000 mm
• Foot switch
For EU market:
• 16 A plug with 5 m power cable
• For MAF and MAZ models, 32 A plug with 5 m power cable
Oglas je automatski preveden. Moguće su greške u prijevodu.
Technical specifications:
Working length: 4040 mm
Total length: 5352 mm
Depth: 2232 mm
Working height: 950 mm
Total height: 1924 mm
Weight: 5,000 kg
Knjdpox Hyhbjfx Anljd
Maximum bending thicknesses:
Steel: 1.5 mm
Aluminum: 2.00 mm
Stainless steel: 1.00 mm
Copper: 2.00 mm
Galvanized sheet: 3.00 mm
Standard equipment:
• 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam
• 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam
• Foot switch (MAF 400/CNC model delivered with a second foot switch)
• Soft start for the bending beam
• Electrically driven back gauge, 8-1000 mm
• 5 m power cable with 32 A mains plug (EU version)
• Supply voltage: 3 x 400 V, 50 Hz (EU version)
CNC S-Touch control:
From profile concept to bending precision in record time
Standard features at no extra charge:
• Graphical display of the bending sequence for the selected program
• Graphical representation of sheet position before every bend
• Operator guidance – each work step visually explained via the graphic control system
• Programming without submenus
• Profile correction by direct touch in the desired section of the profile
• Programmable angle correction
• Set repeat cycles for special radius arcs
• Cutting program for RSL rotary shears
• Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges
• Profile search possible by name, sketch selection, and profile drawing on the touchscreen
• 21.5-inch LCD touchscreen with best-in-class graphics
• USB port for program backup and transfer
• Non-volatile memory for over 3,000 programs
• Freely assignable program names (profile names)
• Registration of produced quantities and machine operating time
• 16 languages
• Remote support (Team Viewer)
• Soft start for bending beam
• Back gauge with drive, 6-1000 mm
• Foot switch
For EU market:
• 16 A plug with 5 m power cable
• For MAF and MAZ models, 32 A plug with 5 m power cable
Oglas je automatski preveden. Moguće su greške u prijevodu.
Dobavljač
Napomena: Registrujte se besplatno ili prijavite, za pristup svim informacijama.
Posljednji put online: prošle sedmice
Registriran od: 2023
9 Oglasi online
Pošaljite upit
Telefon & Faks
+48 667 6... oglasi
Ovi oglasi bi vas također mogli zanimati.
Uspješno
Vaša poruka je poslana.
Mali oglas
Calcinato
603 km
Mašina za savijanje lima
ThalmannTZ 150 6.4M
ThalmannTZ 150 6.4M
Uspješno
Vaša poruka je poslana.
Mali oglas
Švicarska
974 km
FomIndustrie Blitz Alva 450/500 ABC
FomIndustrieBlitz Alva 450/500 ABC
FomIndustrieBlitz Alva 450/500 ABC
Uspješno
Vaša poruka je poslana.
Mali oglas
Mierlo
1.229 km
Okretna mašina za savijanje
RogiWFM2000
RogiWFM2000
Uspješno
Vaša poruka je poslana.
Mali oglas
Zamość
864 km
Centar za rezanje i obradu DG 244 + E580/1
ElumatecDG 244 + E580/1 ROK 2019
ElumatecDG 244 + E580/1 ROK 2019
Uspješno
Vaša poruka je poslana.
Mali oglas
Jonschwil
776 km
Presa za savijanje
PROMECAMRG 102
PROMECAMRG 102
Uspješno
Vaša poruka je poslana.
Mali oglas
Trittau
1.204 km
Mašina za savijanje lima
RAS74.30 3200 x 4mm
RAS74.30 3200 x 4mm
Uspješno
Vaša poruka je poslana.
Mali oglas
Oberaschau
547 km
Mobilna dizalica
LiebherrMK 110
LiebherrMK 110
Uspješno
Vaša poruka je poslana.
Mali oglas
Rīga
1.520 km
Kolica za nošenje krila i okvira
COMALLCARR 600 - 85/9 Q
COMALLCARR 600 - 85/9 Q
Uspješno
Vaša poruka je poslana.
Mali oglas
Wiesbaden
993 km
Stroj za savijanje ploča 3 role
unbekanntunbekannt
unbekanntunbekannt
Uspješno
Vaša poruka je poslana.
Mali oglas
Niederlangen
1.255 km
Mašina za savijanje lima
HERASH 3000 x 5
HERASH 3000 x 5
Vaš oglas je uspješno izbrisan
Došlo je do greške







































































