Panel Saw

Schelling FH 6 430

Automatic panelsaw Schelling
Typ:FH 6 430
Maskin nr:221.287
År:2011

Panel beam saw Schelling with automatic, rear-feed,lifting table.
For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc.

Techn info:
Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC
Operating system WINDOWS XP
PC with keyboard and mouse
TFT monitor 17"
Cutting length 4300mm, automatic detection of the start of the plate
Cutting width 4300mm
Machine accuracy of the cut length 3m +-0.1mm
Positioning accuracy measured at input +-0.1mm
Max diameter saw blade 460mm, spindle 30mm
Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console
Max panel thickness 120mm
Panel stack aligner
Main saw blade motor 27kw
Saw blade over table 135mm
Safety curtain
Air cushion table with 3pcs air ball nozzles, radial ventilator fan
Table sizes
2650x850mm
620x850mm
2650x2550mm
Pressure beam with automatic adjustment of pressure to cut length and package height
Package straightener before and after the pressure beam
Max package height 120mm (incl. sum of curvature and board thickness tolerance)
Pusher with 12 grippers
Max clamp opening (gripper) 133mm
Min-max force package straightener 400/2000N
Speed saw carriage forward 6-150m/min
Speed saw carriage back 150m/min
Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min
Speed feeding back up to 80m/min
Push-off device 3 pcs
Lift table length x width 4350x2550mm
Hydraulic unit
Standard version 1600mm lifting height
1.25/2.5m/min raising speed, 1.25/5m/min lowering speed
Maximum load 1200 kg/m2 total 9 tons
Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm
Max stack weight 6500 kg
Max stack length 1060mm
Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm
Light curtain for personal protection
Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg
Bjdetk It Sjpfx Abroww
Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg
Slots for forklift 2 pcs, center distance 900mm, slot width 400mm
2 positioning stops with roller for stack alignment
Light curtain (double beam) for personal protection
Roller table after saw depth 4300mm, free-running ployamide rollers
Angle stop at the rolling table
Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides
rack and pinion drive, two-sided
Input carriage (pusher) gear rack servo drive, non-contact measuring system
Gripper, (scissor clamps) in pusher 12 pcs
Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0
Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually
Central cleaning system feed trough (pusher)
Compressed air 6-8 bar, approx. 1600l/min
Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC
Dust extraction 4000m/h, air speed 30m/s
Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel)
Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm
Driven roller tracks left-right 5500+5500mm
Stock no: 2002125BXACEO

Subject to incorrect technical data presented