Putujuća stubna glodalica

Soraluce F-MT 4000

Travel ranges:
Longitudinal (X): 4000 mm
Vertical (Z): 1600 mm
Lateral (Y): 1300 mm

Rotary table:
Diameter: 1600 mm
Maximum speed: 250 min⁻¹
Drive power (100% duty cycle): 53 kW
Maximum transport load (positioning): 8000 kg
Maximum transport load (rotation): 3000 - 8000 kg

Work table:
Dodpfx Agozi S E Uj Uouw
Length: 4000 mm
Width: 1240 mm
Height of work table: 760 mm

Automatically indexing milling head:
Tool interface: ISO 50, DIN 69871 AD
Automatic tool clamping: Clamping force 20000 N

Spindle speed range:
Spindle speed: 20 - 5000 min⁻¹
Full power from 340 min⁻¹

Torque at 32 kW/S1: 900 Nm

Main drive:
Drive power: 43 kW

Maximum rapid traverse rate:
X-axis 45000 mm/min
Y- and Z-axis 35000 mm/min

Maximum feed force:
X, Y and Z-axis 16000 N

Automatic tool changer
Magazine positions in M version:
Maximum tool positions: SK 50 40 positions
Maximum tool positions: Capto C8 20 positions

Machine weight: approx. 32,100 kg

Equipment:

- Work table 4000 x 1240 x 760 mm with integrated rotary table Ø 1600 mm

- Swiveling control panel with telescopic arm with HEIDENHAIN TNC 640 HSCI (6 axes + spindle) control, including 19" flat screen, metallic keyboard with integrated mouse and USB interface on the control panel.
Processor speed 0.5 ms including HEIDENHAIN smarT.NC.

- Interpolative turning with HEIDENHAIN TNC 640 HSCI consisting of CAM system, HEIDENHAIN postprocessor, software adaptation for C-axis (spindle).

- Portable electronic hand-held unit HEIDENHAIN HR 520 with 5 m cable.

- Automatically indexing milling head / 2 levels with 2.5° x 2.5° division and a tool clamping force of 20,000 N (H200), 32 kW / 900 Nm, tool interface ISO 50 - DIN 69871 AD. Mounting flange with Hirth gearing for adapting turning tool holders, grinding spindles or additional milling heads and a protective ring to cover the Hirth gearing; not required if H205 is selected.

- Spindle drive 43 kW at 100% duty cycle via water-cooled HEIDENHAIN inline motor with direct power transmission. The motor is integrated into the milling slide.

- Turning tool holder with Capto C8 interface (manual tool clamping) for turning operations incl. Hirth gearing and SK 50 interface according to DIN 69871 AD for adaptation to SORALUCE milling heads. (Semi-automatic changing with additional manual fastening by 8 x M8 screws); not required with fully automatic changing of the turning tool holder.

- Pneumatically adjustable pick-up station (travel 500 mm) in the tool changer area for the turning tool holder and protective ring for semi-automatic changing.

- Work table with integrated NC rotary table Ø 1,600 mm, for turning operations and for positioning operations with hydraulic clamping.

- Rack and pinion drive in the X-axis via two servomotors controlled in a master-slave process.

Oglas je automatski preveden. Moguće su greške u prijevodu.