Polovna HDPE mašina za duvanje za 10 L, 300 boca/h

UNILOY MILACRON HMS 10/D

Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview
Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126.
Technical Specifications & Performance Data
Main data

Make/Model: Uniloy Milacron HSM10/D
Year: 2000
Technology: Extrusion Blow Molding (EBM), single parison
Material: HDPE
Number of cavities: 1
Max container volume: 10 L
Indicative output: up to about 300 bph on 10 L (application-dependent)
Manuals: included
Ref. no.: SO126

Extruder

Screw diameter: 100 mm; L/D 24
HDPE screw speed: 0–70 rpm
Plasticizing capacity (HDPE): approx. 300 kg/h
Main extruder motor: 89 kW
Heating zones: 6; barrel heating power: 31.4 kW
Motor cooling power: 0.58 kW; barrel cooling power: 1 kW

Parison head
Fgedpfx Aoyhbt Hsiyjb

Type: PE 1/200, single parison
Max die diameter: 200 mm
Head heating power: 14.2 kW
Parison thickness control: hydraulic (wall-thickness programming)

Clamp & blow unit

Clamp force: 200 kN
Max mould size: 650 × 500 mm (H)
Mould thickness: 2 × 150 mm
Mould opening stroke: 300 mm
Horizontal carriage stroke: 660 mm
Blow pin stroke: 240 ± 5 mm
Blow pin thrust at 50 bar: 320 kg

Electrical

Installed power: 156 kW (average consumption ~104 kW)
Supply: 400 V, 50 Hz, 318 A, 3 + N

Hydraulic system

Reservoir capacity: 400 l
Pump flow (1470 rpm): 123 l/min
Max pressure (main circuit): 190 bar
Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW

Pneumatics

Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min
Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min

Cooling water

Mould circuit: 8–12 °C; flow 15 m³/h
Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h

Dimensions & weights

Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm
Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg
Noise level at operator: < 85 dB(A)

Advanced Automation & Control Systems

Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers.
Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics.
Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature.
Interlocked guarding and emergency stops for safe operation.

Production Line Integration Capabilities
This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems:

Conveyor...