Preša za limenke, paketirna preša s pritiskom od 70 tunoTech
UPAXX 70
Preša za limenke, paketirna preša s pritiskom od 70 t
unoTech
UPAXX 70
EXW fiksna cijena PDV se ne može posebno iskazati
10.000 €
Godina proizvodnje
2019
Stanje
Polovno
(potpuno funkcionalan)
Lokacija
Nizozemska 

Cijena i lokacija
EXW fiksna cijena PDV se ne može posebno iskazati
10.000 €
- Lokacija:
- , Nizozemska

Pozovite
Tehnički detalji
- Pritisna snaga:
- 70 t
- Ukupna masa:
- 9.500 kg
- Godina posljednjeg generalnog remonta:
- 2025
- Širina otvora za punjenje:
- 420 mm
- Dužina otvora za punjenje:
- 1.250 mm
Detalji ponude
- ID oglasa:
- A22072873
- Ažuriranje:
- posljednji put 06.06.2026
Opis
Technical data packing press / can press / metal sheet press:
Manufacturer unoTech GmbH
Type UPAXX 70
Year of manufacture 2019
Operating hours approx. 3,000 hours
Pressing force 700 kN at 315 bar
Filling opening chute 420 x 1,250 mm (d x w)
Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material
Drive power 30 kW
Connected load 40 kW
Power consumption, total 70 A
Throughput capacity for empty beverage cans with:
one pressing stroke approx. 1.7 t/hour
two pressing strokes approx. 2.5 t/hour
Achieved compaction approx. 1200 kg/m³
Hydraulic oil tank capacity 850 l
Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h)
Transport weight press approx. 9.5 t
Accessories:
Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355
Material properties:
According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste.
Condition of the baler:
The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense.
Comments:
The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.
Crodpszbxvlofx Abmjc
Manufacturer unoTech GmbH
Type UPAXX 70
Year of manufacture 2019
Operating hours approx. 3,000 hours
Pressing force 700 kN at 315 bar
Filling opening chute 420 x 1,250 mm (d x w)
Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material
Drive power 30 kW
Connected load 40 kW
Power consumption, total 70 A
Throughput capacity for empty beverage cans with:
one pressing stroke approx. 1.7 t/hour
two pressing strokes approx. 2.5 t/hour
Achieved compaction approx. 1200 kg/m³
Hydraulic oil tank capacity 850 l
Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h)
Transport weight press approx. 9.5 t
Accessories:
Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355
Material properties:
According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste.
Condition of the baler:
The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense.
Comments:
The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.
Crodpszbxvlofx Abmjc
Dokumenti
Vaš oglas je uspješno izbrisan
Došlo je do greške




































