Tokarilica sa olovnim/dovodnim vretenomWeiler
Primus Tischdrehmaschine
Tokarilica sa olovnim/dovodnim vretenom
Weiler
Primus Tischdrehmaschine
VB plus PDV
12.500 €
Stanje
Polovno
Lokacija
Ubstadt-Weiher 

Slike prikazuju
Prikaži kartu
Podaci o mašini
- Naziv mašine:
- Tokarilica sa olovnim/dovodnim vretenom
- proizvođač:
- Weiler
- Model:
- Primus Tischdrehmaschine
- Stanje:
- vrlo dobro (rabljeno)
- funkcionalnost:
- potpuno funkcionalan
Cijena i lokacija
VB plus PDV
12.500 €
- Lokacija:
- Großer Sand 19-21, 76698 Ubstadt-Weiher, DE
Pozovite
Detalji ponude
- ID oglasa:
- A18829986
- ažuriranje:
- posljednji put 28.03.2025
Opis
Weiler Primus guide and feed spindle table lathe in excellent condition!
Technical specifications:
>> Machine no. 2801
>> Center height 120 mm
>> Center distance 430 mm
>> Speed: 60 - 3000 rpm in 18 gear steps
>> Spindle bore 23 mm
>> Short-taper spindle head DIN 55027
>> Tailstock MT 2
>> Feed rates from 0.03 to 0.15 mm/rev
>> Possible thread sizes: metric, inch, module, and diametrical pitch
>> Metric thread pitches from 0.25 to 2.5 mm
>> Length 1.2 m, height 1.3 m, depth 0.65 m
Accessories and equipment:
>> 1 x Röhm 125 mm three-jaw chuck with 4 sets of jaws
>> Collet chuck with collets from 2 mm to 12 mm, increments of 1 mm Drawbar
>> Multifix size A with 4 tool holders
>> Change gears
>> Fixed steady rest
>> Faceplate
>> Spindle cover
>> Clamping tool
About the machine:
Kjdpsv Tyzcefx Aadjdu
Offered is a Weiler Primus table lathe with guide rail and drawbar in very good condition. The machine is fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a state-owned company where it was used little. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a polished finish. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. (The base cabinet is included; the machine is not bolted to the machine.)
A digital display is available for an additional charge.
Oglas je automatski preveden. Moguće su greške u prijevodu.
Technical specifications:
>> Machine no. 2801
>> Center height 120 mm
>> Center distance 430 mm
>> Speed: 60 - 3000 rpm in 18 gear steps
>> Spindle bore 23 mm
>> Short-taper spindle head DIN 55027
>> Tailstock MT 2
>> Feed rates from 0.03 to 0.15 mm/rev
>> Possible thread sizes: metric, inch, module, and diametrical pitch
>> Metric thread pitches from 0.25 to 2.5 mm
>> Length 1.2 m, height 1.3 m, depth 0.65 m
Accessories and equipment:
>> 1 x Röhm 125 mm three-jaw chuck with 4 sets of jaws
>> Collet chuck with collets from 2 mm to 12 mm, increments of 1 mm Drawbar
>> Multifix size A with 4 tool holders
>> Change gears
>> Fixed steady rest
>> Faceplate
>> Spindle cover
>> Clamping tool
About the machine:
Kjdpsv Tyzcefx Aadjdu
Offered is a Weiler Primus table lathe with guide rail and drawbar in very good condition. The machine is fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a state-owned company where it was used little. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a polished finish. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. (The base cabinet is included; the machine is not bolted to the machine.)
A digital display is available for an additional charge.
Oglas je automatski preveden. Moguće su greške u prijevodu.
Dobavljač
Napomena: Registrujte se besplatno ili prijavite, za pristup svim informacijama.
Registriran od: 2007
Pošaljite upit
Telefon & Faks
+49 7251 ... oglasi
Vaš oglas je uspješno izbrisan
Došlo je do greške