Dvostruko oblikovanje rubova

BIESSE STREAM SB2 10.5

Technical characteristics
Hsdpfx Astrihvebfow
Panel width : 240 mm to 1200 mm
Panel length : 240 mm to 3000 mm
Panel thickness : 10 mm to 60 mm
Band thickness : 0,3 mm to 3 mm
Pin inner axis : 500 mm
ENTRY / EXIT :
Transfer realised with special chains covered in stainless long lasting rubber
Entry pivoting guides adjustable depending on panel type
Closing device on above pressor to assure the pressing of the panel against the pins
Delaying device in entry for optimization of different width panel dimensions
Single part rigid structural longitudinal chassis
ADVANCE CHAIN :
Continuous speed tuning from 10 to 40 m/min by INVERTER CN direct numerical command
The stop pins are automatically adjusted in height by CN and can have : height/thickness 12- 18-23 mm from the chain level
Chain pin inner axis 500 mm
BELT PRESSOR
SOUNDPROOF CABINS
All machining groups inside the machine are surrounded by soundproof material Internal lighting
CN command placed at entry of the machine, fixed chassis side
NUMERICAL CONTROL
Video interface
Positioning axis control
Chain advance speed tuning
Pressor height adjusting depending on panel thickness Automatic adjustment of band changing and band charger Moulding list management
Sequenced motor startup
Possibility of connection to a barcode reader
Module NC410
MILLING GROUP
Timed pneumatical anti shard action for transversal milling Tool rotation speed : 6000 rpm
Motor power : 5.8 kW
Tool Ø : 200 mm
DOUBLE SUPERPOSED SPLINTERS
Simultaneous displacement for thickness adjustment and independent adjustment vertical and horizontal
Cast iron bearing structure
Tool speed rotation : 6000 rpm
Motor power : 5.8 kW Tool Ø : 205 to 250 mm
EXTENSION MACHINE to 3200 mm
AUTOMATIC CENTRAL SUPPORT 10.5
This device allows support of parts that due to their dimensions or thickness can subdue central bending
Fully automatic activation
GLUING GROUP SP3
Straight bands in resin, melamine, ABS, PVC, PP EVA basis thermoplastic glue
Independent Teflon covered changeable glue tank Glue level sensor inside the tank
Glue input roller speed synchronized with the chain advance Breveted pre fusion device
Glue granule container (8kg)
Band presence detection device
Automatic band changing procedure
6 POSITION MOBILE BAND CHARGERS
END CUTTING
End cutting unit for edge thicknesses up to 3 mm
Device for quick removal in stroke
Automatic exclusion of the unit when the motors are stopped
Speed : 12000 rpm
Panel projection : 35 mm
Edge thickness : 0.3 to 3 mm
Panel thickness : 10 to 60 mm
Interval between 2 consecutive panels : 350 mm
WHOLESALE TRIMMING UNIT
2 superimposed motors with horizontal axis
Automatic pneumatic exclusion of the group
Speed : 12000 rpm
Motor power : 1.3 + 1.3 kw
Panel thickness : 10 to 60 mm
Tool diameter : 80 mm
ANGLE TRIMMING GROUP
The adjustment of the position of the tool in relation to the material is automatic with predefined dimensions on 4 pre-adjustable in-line stops
The in-line stops are automatically selected by the control
Use on the MULTIPROFIL tool group to change profile/shape without replacing the tool
Tools are equipped with 20° chamfer and 1.5-2-3 mm radius
Speed : 12000 rpm
Motor power : 0.65 + 0.65 kw
Panel thickness : 10 to 60 mm
TOP / BOTTOM ROUNDING GROUP
Rounding copier for the upper and lower stops of the panel with oscillating movement for the continuation of the panel
Quick release system of the motor-holder groups
Automatic exclusion of the tool with stopped motors
Tool rotation speed : 12000 rpm
Motor power : 0.3 kw