Tračna pila

CORMAK S-200R manual

Cormak S200R Manual band saw for cutting in large industrial facilities.

Features high accuracy metal cutting, even at 45º/60º.
Machine features

CORMAK S-200R MANUAL band saw with EC declaration, provides cutting metal at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Appropriate arm lowering speed is ensured by a valve controlling oil flow between the chambers.

Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. Material is fed manually. This model is used in both low and high quantity production, and due to its solid construction allows for cutting various materials, including stainless steel, tool steel and profiles. The machine provides cutting at an angle due to rotary arm. The band saw arm is made of uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of various materials. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. The arm is equipped with an automatic blade tension sensor, at a 25° angle, thus increasing blade's durability.

There is a blade cleaning brush attached to the bottom of the arm. Machine drive is transmitted through a worm drive filled with gear oil. The machine is equipped with a three-phase motor with double winding and two cutting speeds. The motor is thermally protected.

Two cutting band speeds: 35 and 70 m/min. The construction: the arm, the vice and the rotating table are iron castings. Closed cooling system. The machine is equipped with a bumper with a ruler for setting the length of material cut. The base of the machine is a rigid cuboid made of steel sheets in which a fluid container with a flood coolant pump is located. Safety during cutting ensures an electrical system that meets all EC requirements. The machine is equipped with a limit switch which stops the machine after a cutting process is finished, an emergency button, and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened

Technical data

Type gravitational

Arm raising and lowering gravitational with stepless arm lowering adjustment

Band speed 36/70 m/min

Cutting at an angle from 45° left up to 60° right

Vice manual

Minimum cutting diameter Ø 5 mm

Minimum material length in vice 30 mm

Vice base height 890 mm

Cutting band dimensions 27×0.9×2910 mm

Total power 2.1 kW

Dimensions (LxWxH) 1600×800×1400 mm

Weight 500 kg


Max. cutting range [mm]

Angle

Kdsdpfxjfy Ttio Advjg
0º ø250 320×240 240×240

45º L ø200 220×120 190×190

45º P ø220 235×120 210×210

60º P ø110 155×110 100×100
For more information please visit our web page or contact us