Vertikalni centar za okretanje jednog vretena

EMAG VL 400 (Siemens)

Vertical Single-Spindle Turning Center Vertical Lathe
Manufacturer: EMAG
Model: VL 400 (Siemens)
Year of manufacture: 2021
Operating hours: approx. 1,848

Turret base unit and Y-axis slide unit

HP turret drive unit for driven tools (C442) with internal coolant supply to the tool
Maximum speed: 6,000 rpm
Corner speed: 3,200 rpm
Tool carrier unit for driven tools: 12 x BMT75

Circulating workpiece transport system, O-version
Drag frame system for 10 workpieces
Workpiece height (including workpiece pallet): max. 300 mm
Workpiece weight: max. 60 kg

Set (10 pcs) drag frames for O-belt
For workpiece diameter: 150 - 400 mm

Blow-off for workpiece and clamping device (pick-up)

Coolant supply: 15 bar
Coolant pump delivery rate approx. 80 l/min at 15 bar.
Cooling unit (6.5 kW, water - air)
A cooling unit (with 2-circuit technology) regulates the thermal balance of the machine.
Spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C).

Coolant double filter, manually switchable
Filter fineness 100 μm, with electrical and mechanical contamination indicators

Chip conveyor
Hinged belt version: rear discharge
Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l)
Bdodpjvq Iwyefx Abrsi

Emulsion mist extraction system: extraction capacity approx. 800 m³/h
Rinsing gun

Workpiece measurement with probe
Blow-off for measurement probe
Tool life monitoring (sister tool management)

Tool breakage monitoring TOOLINSPECT MCU-EUROPA
(SIEMENS 840Dsl, FANUC 31i/32i)

3-color signal tower

Axial drilling/milling head – BMT75 CC
5x angle drilling/milling head 90° - BMT75 CC (i=1:1)
Set of tools for OP10 + OP20

Hydraulic 3-jaw power chuck KNCS-N 500-155 quick change
Max. = 2,200 rpm (reference speed according to DIN 6386)
Set of hard master jaws
Set of soft top jaws

Attachment parts for KNCS-N 500-155
Flush nozzle in chuck bore

Additional tool holders with tools:
1x 8.BMT25VL8IKX50 Rough turning tool external
1x 8.BMT25VL8IKX50 Finish turning tool external
1x 60.7516VL8IKDI15 Engraving tool
1x 60.7516VL8IKDI15 Tapping holder
1x 40.75V5KRVL8IKD Milling cutter 50mm
3x 80.75V5VL8IKD Boring bar holders
2x 27.V520HYDL26 Drill diameter 20mm
1x 42.V522L08IK Drill diameter 22mm
1x 27.V514WNL31 Drill diameter 14mm

Software package
Operating manual / maintenance manual
221025ä

Oglas je automatski preveden. Moguće su greške u prijevodu.