ELEKTRO-EROZIJA ŽICAEXCETEK
V1280/600
ELEKTRO-EROZIJA ŽICA
EXCETEK
V1280/600
godina proizvodnje
2018
Stanje
Polovno
Lokacija
Borgo San Dalmazzo 

Slike prikazuju
Prikaži kartu
Podaci o mašini
- Naziv mašine:
- ELEKTRO-EROZIJA ŽICA
- Proizvođač:
- EXCETEK
- Model:
- V1280/600
- Godina proizvodnje:
- 2018
- Stanje:
- skoro nov (polovno)
- Funkcionalnost:
- potpuno funkcionalan
Cijena i lokacija
- Lokacija:
- Via Vecchia Di Cuneo 51/A, 12011 Borgo San Dalmazzo, Italia

Pozovite
Detalji ponude
- ID oglasa:
- A20523010
- Ažuriranje:
- posljednji put 13.11.2025
Opis
Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm
Maximum workpiece weight: 4,000 kg
X and Y axis travel: 1,200 x 800 mm
U and V axis travel: 260 x 260 mm
Z axis travel: 600 mm
Permissible wire diameter: 0.2 – 0.3 mm
Simultaneous controllable axes: 4 (X, Y, U, V)
Motors: AC motors on all 5 axes
Maximum taper: 30° over 100 mm
Machine weight: 9,600 kg
Filtration system
Capacity: 3,000 L
Conductivity control: automatic
Resin capacity: 14 L
Temperature control: automatic
Dielectric cooling system: chiller
Generator
Power circuits: Mosfet AC
Minimum roughness: Ra 0.35
Cutting speed: 360 mm²/min (with 0.3 mm brass wire)
Automatic wire threading: standard
Power supply: 400V three-phase
CNC
Hardware: Industrial PC, 64 bit
Memory: 1 GB
Display: 15” TFT touchscreen
Data input: keyboard, RS 232, floppy, LAN, USB
Positioning system: closed-loop servo-assisted
Number of controlled axes: 5 (X, Y, U, V, Z)
Minimum programmable increment: 0.0001 mm
Machine equipped with:
• Optical scales on X and Y axes
• 600 mm Z axis
• Coil holder for up to 50 kg spools
• 1 set of 0.25 mm guides
• 1 set of 0.30 mm guides
• Taper cutting system
• Automatic wire threading and re-threading after breakage
• Clamping system: frame with universal drilling
• 64-bit CNC with 16 GB memory
Lhsdpfx Asxwmaceczop
• AC power generator with anti-electrolysis device
• Automatic technology generation
• Serial interface, floppy drive, LAN, USB
• Dielectric unit with automatic demineralization system
• Chiller
Year of manufacture: 2018
Oglas je automatski preveden. Moguće su greške u prijevodu.
Maximum workpiece weight: 4,000 kg
X and Y axis travel: 1,200 x 800 mm
U and V axis travel: 260 x 260 mm
Z axis travel: 600 mm
Permissible wire diameter: 0.2 – 0.3 mm
Simultaneous controllable axes: 4 (X, Y, U, V)
Motors: AC motors on all 5 axes
Maximum taper: 30° over 100 mm
Machine weight: 9,600 kg
Filtration system
Capacity: 3,000 L
Conductivity control: automatic
Resin capacity: 14 L
Temperature control: automatic
Dielectric cooling system: chiller
Generator
Power circuits: Mosfet AC
Minimum roughness: Ra 0.35
Cutting speed: 360 mm²/min (with 0.3 mm brass wire)
Automatic wire threading: standard
Power supply: 400V three-phase
CNC
Hardware: Industrial PC, 64 bit
Memory: 1 GB
Display: 15” TFT touchscreen
Data input: keyboard, RS 232, floppy, LAN, USB
Positioning system: closed-loop servo-assisted
Number of controlled axes: 5 (X, Y, U, V, Z)
Minimum programmable increment: 0.0001 mm
Machine equipped with:
• Optical scales on X and Y axes
• 600 mm Z axis
• Coil holder for up to 50 kg spools
• 1 set of 0.25 mm guides
• 1 set of 0.30 mm guides
• Taper cutting system
• Automatic wire threading and re-threading after breakage
• Clamping system: frame with universal drilling
• 64-bit CNC with 16 GB memory
Lhsdpfx Asxwmaceczop
• AC power generator with anti-electrolysis device
• Automatic technology generation
• Serial interface, floppy drive, LAN, USB
• Dielectric unit with automatic demineralization system
• Chiller
Year of manufacture: 2018
Oglas je automatski preveden. Moguće su greške u prijevodu.
Dobavljač
Napomena: Registrujte se besplatno ili prijavite, za pristup svim informacijama.
Registriran od: 2020
Pošaljite upit
Telefon & Faks
+39 0171 ... oglasi
Vaš oglas je uspješno izbrisan
Došlo je do greške


