Prikolica za platformu

Faymonville MAX210-Z-3AA-13.60-22.5-2.54 / 2X EXTENDABLE UP...

- BPW axles
- EBS
- Air suspension
- Disc brakes
- Central lubrication system

NEW MAX210-Z-3AA-13.60-22.5-2.54, available directly from stock

Technical data MAX210-Z-3AA-13.60-22.5-2.54
Total weight: 48,000 kg / Coupling pressure: 18,000 kg / Axle load: 30,000 kg / Tare weight: 11,456 kg / Payload approx.: 36,544 kg / Coupling height (laden): 1150–1250 mm / Turning radius: 2300 mm

Loading area length: 13,600 mm / 2-way extendable (2 x 770 mm) to 2900 mm / Wheelbase: 1810 mm

Fgsdpfxjzhxgie Ak Ujd
Technical description: Extendable loading area with pneumatic locking / A fixed intermediate table of ± 250 mm is located in the central box structure. / 8 pairs of lashing eyes that fold outwards (LC 5,000 daN) / 3 pairs of lashing eyes that fold outwards (LC 10,000 daN) / Recesses in the outer frame for attaching lashing straps (LC 2,000 daN)

Tires:
Tires 385/65 R22.5 (Brand: Goodyear)

Tire pressure monitoring system (TPMS):
TPMS according to ECE R 141

Axles:
BPW axles with disc brakes, air-suspended with raising and lowering valve. All axles are hydromechanically steered. Technical axle load: 10,000 kg (ET 0)

Braking system:
WABCO braking system according to EU regulations with EBS-E system (2S2M), without connecting cable to the tractor. Steel structure:
Steel structure made of high-quality fine-grain steel.

Steel grades: S355J2+N/S355MC (Yield strength 355 MPa) / S690QL/S700MC (Yield strength 690 MPa)

Electrical system:
Electrical system according to EU regulations, lighting 24 V ASPÖCK-NORDIK (ASS3).
ASPÖCK-UNIBOX on the galvanized connection strip at the front with 24N, 24S and 15-pin sockets.
Connections according to ISO / 24N ISO-1185 / 24S ISO-3731 / 15-pin ISO-12098

Warning signs:
Below the gooseneck and at the rear, left and right, holder for warning signs with socket. Options:
• Maneuverability at the front and rear via cable remote control with PDC light control for axle alignment. (without mounting on the tractor)
• Electro-hydraulic unit (approx. 45 kg)
• 2 wheel chocks with holder on the partition wall
• Kingpin 2"
• Galvanized steel partition, approx. 1600 mm high. EN12642-XL
• White reflector tape according to EU regulations over the entire length and width. Red at the rear.
• EU marking plates (red-yellow) at the rear of the vehicle.
• Holder for a rotating beacon at the rear of the vehicle.
• Loading floor made of 30 mm thick hardwood, reinforced with omega profiles (approx. 298 kg).
• 10 pairs of stake holder, approx. 100 x 50 mm, in the outer frame of the loading floor.
• 1 spare wheel holder under the loading floor on the right.
• BEKAMAX (Pico) central lubrication system with 2 pumps.
• 6 pairs of recesses in the loading floor for WADER container locks, for 1 x 20', 2 x 20', 1 x 40' or 1 x 45' container.
• 5 pairs of stake profiles, mounted across in the loading floor, for stakes 100 x 50 mm
• Galvanized storage compartment under the loading floor (2390 x 720 x 400 mm)
• Rope hooks (8 mm), every approx. 500 mm below the edge profile of the gooseneck and the loading floor
• Ladder, mounted on the left in the direction of travel
• Stainless steel toolbox
• LED lighting
• 10 pairs of twist locks (100 x 50 mm, length 1000 mm)
• 8 container

General information
Year of manufacture: 2026...

Oglas je automatski preveden. Moguće su greške u prijevodu.