Horizontalni četveroosni obradni centarHeller
H 5000
Horizontalni četveroosni obradni centar
Heller
H 5000
Godina proizvodnje
2025
Stanje
Polovno
(potpuno funkcionalan)
Lokacija
Besigheim 

Osnovni podaci
- Naziv mašine:
- Horizontalni četveroosni obradni centar
- Proizvođač:
- Heller
- Model:
- H 5000
- Godina proizvodnje:
- 2025
- Stanje:
- skoro nov (polovno)
- Funkcionalnost:
- potpuno funkcionalan
Cijena i lokacija
- Lokacija:
- Besigheim, Deutschland

Pozovite
Detalji ponude
- ID oglasa:
- A23350937
- Ažuriranje:
- posljednji put 18.11.2026
Opis
If you are interested, please submit a purchase offer.
4-axis HELLER machining center H5000
Location: Besigheim
Facility closure
The machine has already been disassembled by the manufacturer, Heller.
Collection will take place this year.
Machining center H 5000
Machine
Horizontal 4-axis machining center H 5000
Siemens control SINUMERIK ONE
Machine bed in T-design
Work area: 800 × 800 × 800 mm
Pallet size: 630 × 630 mm
Two pallets with DIN hole pattern
Pallet changer
Manually rotatable workpiece clamping device with 4 × 90°
Operating voltage: 400 V, 50 Hz
HELLER standard paint finish:
Signal white, RAL 9003
Anthracite gray, RAL 7016
Ultramarine blue, RAL 5002
Main spindle
Dynamic Cutting DC 100
Tool holder: HSK-A 100
Speed range: 5 to 12,000 rpm
Drive power: 45 kW
Max. torque: 400 Nm
Manual tool change directly into the spindle
Tool extraction to reduce coolant carryover and mist
Ijds Akxy Hepfx Afxebd
Tool management
Chain magazine with 50 tool positions
Increased tool weight and moment of inertia according to technical specifications
Tool measurement with BLUM LC50 DIGILOG
BLUM radio receiver for measuring probe
Measuring probe TC62 including BTH25-3
Siemens measuring cycles
Comfort operating terminal at the tool clamping station
Workpiece management
Workpiece clamping device with manually rotatable pallet
Mechanical workpiece clamping
Two pallets in the base machine
Pallet change accuracy according to technical specifications
Coolant and disposal systems
Scraper conveyor for wet machining
Electrical run control of the chip conveyor
Paper band filter TMF600
Coolant supply with 70 bar
Frequency-controlled high-pressure pump
Work area flushing
Coolant tank with a capacity of 1,050 l
Interface for a customer-side extraction system
Separate connection for an oil skimmer
MMS system from Dropsa
Preparation for an oil mist separator
Control and software
Siemens SINUMERIK ONE with NCU 1750 and PLC S7-1500F
24-inch multi-touch screen
HELLER Operation Interface
PC keyboard on the main operating unit
Extended NC user memory
Additional program data memory on SD card
3D data for working space models
ToolScope for tool process monitoring
Hardware for spindle condition monitoring
Preparation for integration into a company network
Ethernet interface
Support for machine communication via OPC UA
Preparation for additional data acquisition hardware
Reserved installation space and 24 V DC supply in the control cabinet
Camera and measuring technology
Internal camera from Uyar
Visualization of the camera images on the operating panel
BLUM workpiece measuring probe
BLUM laser measuring bridge LC50 for tool breakage detection
Remote maintenance
HELLER4Industry Remote Diagnostics
Remote access for fault diagnosis
Automated data services for condition and fault analysis
Testing and training as part of commissioning
Documentation
The delivery includes, among other things:
Operating and programming instructions
Maintenance and repair documents
Spare parts and wear parts lists
Electrical, hydraulic and pneumatic circuit diagrams
3D data for working space models
Safety data sheets for the media used
Basic settings of the machine parameters
Declaration of conformity and CE marking
Foundation construction and placement of the machine up to the installation location
Installation area: approx. 7.3 × 3.38 m
Machine height: approx. 3.90 m
Oglas je automatski preveden. Moguće su greške u prijevodu.
4-axis HELLER machining center H5000
Location: Besigheim
Facility closure
The machine has already been disassembled by the manufacturer, Heller.
Collection will take place this year.
Machining center H 5000
Machine
Horizontal 4-axis machining center H 5000
Siemens control SINUMERIK ONE
Machine bed in T-design
Work area: 800 × 800 × 800 mm
Pallet size: 630 × 630 mm
Two pallets with DIN hole pattern
Pallet changer
Manually rotatable workpiece clamping device with 4 × 90°
Operating voltage: 400 V, 50 Hz
HELLER standard paint finish:
Signal white, RAL 9003
Anthracite gray, RAL 7016
Ultramarine blue, RAL 5002
Main spindle
Dynamic Cutting DC 100
Tool holder: HSK-A 100
Speed range: 5 to 12,000 rpm
Drive power: 45 kW
Max. torque: 400 Nm
Manual tool change directly into the spindle
Tool extraction to reduce coolant carryover and mist
Ijds Akxy Hepfx Afxebd
Tool management
Chain magazine with 50 tool positions
Increased tool weight and moment of inertia according to technical specifications
Tool measurement with BLUM LC50 DIGILOG
BLUM radio receiver for measuring probe
Measuring probe TC62 including BTH25-3
Siemens measuring cycles
Comfort operating terminal at the tool clamping station
Workpiece management
Workpiece clamping device with manually rotatable pallet
Mechanical workpiece clamping
Two pallets in the base machine
Pallet change accuracy according to technical specifications
Coolant and disposal systems
Scraper conveyor for wet machining
Electrical run control of the chip conveyor
Paper band filter TMF600
Coolant supply with 70 bar
Frequency-controlled high-pressure pump
Work area flushing
Coolant tank with a capacity of 1,050 l
Interface for a customer-side extraction system
Separate connection for an oil skimmer
MMS system from Dropsa
Preparation for an oil mist separator
Control and software
Siemens SINUMERIK ONE with NCU 1750 and PLC S7-1500F
24-inch multi-touch screen
HELLER Operation Interface
PC keyboard on the main operating unit
Extended NC user memory
Additional program data memory on SD card
3D data for working space models
ToolScope for tool process monitoring
Hardware for spindle condition monitoring
Preparation for integration into a company network
Ethernet interface
Support for machine communication via OPC UA
Preparation for additional data acquisition hardware
Reserved installation space and 24 V DC supply in the control cabinet
Camera and measuring technology
Internal camera from Uyar
Visualization of the camera images on the operating panel
BLUM workpiece measuring probe
BLUM laser measuring bridge LC50 for tool breakage detection
Remote maintenance
HELLER4Industry Remote Diagnostics
Remote access for fault diagnosis
Automated data services for condition and fault analysis
Testing and training as part of commissioning
Documentation
The delivery includes, among other things:
Operating and programming instructions
Maintenance and repair documents
Spare parts and wear parts lists
Electrical, hydraulic and pneumatic circuit diagrams
3D data for working space models
Safety data sheets for the media used
Basic settings of the machine parameters
Declaration of conformity and CE marking
Foundation construction and placement of the machine up to the installation location
Installation area: approx. 7.3 × 3.38 m
Machine height: approx. 3.90 m
Oglas je automatski preveden. Moguće su greške u prijevodu.
Pošaljite upit
Telefon & Faks
+49 641 9... oglasi
Ovi oglasi bi vas također mogli zanimati.
Uspješno
Vaša poruka je poslana.
Mali oglas
Austrija
974 km
HELLER H5000
HELLERH5000
HELLERH5000
Uspješno
Vaša poruka je poslana.
Mali oglas
Eisfeld
886 km
Horizontalni obradni centar
Heller+FPT1000HF5500+FPT1000
Heller+FPT1000HF5500+FPT1000
Uspješno
Vaša poruka je poslana.
Mali oglas
Austrija
974 km
HELLER H5000
HELLERH5000
HELLERH5000
Uspješno
Vaša poruka je poslana.
Mali oglas
Bristol
1.727 km
2016 Spinner U-1520 5-osna
SpinnerU-1520 5 Axis
SpinnerU-1520 5 Axis
Uspješno
Vaša poruka je poslana.
Mali oglas
Viersen
1.178 km
CNC glodalica za struganje i glodanje
MonfortsRNC 500 Multiturn
MonfortsRNC 500 Multiturn
Uspješno
Vaša poruka je poslana.
Mali oglas
Mönchengladbach
1.162 km
Mašina za mjerenje koordinata
MitutoyoCrysta Apex C776
MitutoyoCrysta Apex C776
Uspješno
Vaša poruka je poslana.
Mali oglas
Fellbach
844 km
Hidraulična dizalica 10to
HTS ECO-JackHTS ECO-Jack EJ100-3S
HTS ECO-JackHTS ECO-Jack EJ100-3S
Uspješno
Vaša poruka je poslana.
Mali oglas
Werlte
1.239 km
CNC tokarilica
OkumaMULTUS B300II-W
OkumaMULTUS B300II-W
Uspješno
Vaša poruka je poslana.
Mali oglas
Dorsten
1.174 km
CNC tokarilica
INDEXG 200
INDEXG 200
Uspješno
Vaša poruka je poslana.
Mali oglas
Njemačka
922 km
Mašina za površinsko brušenje
ELB-SchliffOptimal 6375 VA2-ND
ELB-SchliffOptimal 6375 VA2-ND
Vaš oglas je uspješno izbrisan
Došlo je do greške
































































































