Infracrvena peć za sušenje filmskih kompozita

IBT Infra Bio Tech GmbH Infrarot Aushärteofen

Manufacturer
IBT.InfraBioTech GmbH
Art.-No. 3200 0088

Technical Data
Condition: As new; little used from test series
Functionality: Fully functional
Year of manufacture: 2018
Connected load: 58 kW
Cooling capacity, water connection on-site: 30 kW
Conveyor belt length: 7,000 mm
Conveyor belt width: 310 mm
Infeed height: 55 mm
Infeed width: 308 mm

TECHNICAL DETAILS
Application: Conveyor oven for curing in film bonding technology
Component temperature: max. 100°C
Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm
Overall height without control cabinet: 2,000 mm
Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm
Base frame made of stainless steel profile tube, height adjustable: ± 30 mm

Conveying system
Vacuum conveyor belt made of silicone, belt 310 mm wide
Transport speed: max. 5 m/min
Conveyor belt height: 950 mm ± 30 mm
Hedpfx Aewnm Uksbfow
Belt infeed/outfeed openings (WxH): 308 x 35 mm
Free area infeed: approx. 750 mm
Free area outfeed: approx. 750 mm

Conveyor belt operation:
Continuous operation, adjustable up to max. 5 m/min,
tracking regulation with light barrier safety system at infeed and outfeed. Loading and unloading are performed manually.

Intended use
The curing oven is a belt system for continuous operation with a feed speed of max. 5 m/min. Open areas at the infeed and outfeed sections are provided for loading and unloading components. The enclosed heating section houses 6 IR modules (height adjustable). The maximum component temperature is 100°C and serves to heat solvent-free adhesive between composite film layers. The return side of the belt, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are held onto the conveyor belt by vacuum. The control cabinet is located separately from the machine outside the cleanroom.

The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The equipment is exclusively for the warming of film composites.

Features
- 6 adjustable infrared heating modules, each with 6 infrared emitters
- 6 pyrometers for precise temperature control
- PU conveyor belt for efficient material flow
- Integrated control and regulation system
- Height-adjustable stainless steel base frame
- Vacuum conveyor belt
- Cooling water distribution in the base frame (G1")
- Water cooling for the belt return section and rear sides of IR modules
- Mechanically lockable service doors
- Operator panel mounted at the infeed on the left side
- Control cabinet cooling unit, water connection on-site

History
This oven was intended for use in a cleanroom environment and was only used briefly for a test series. The oven was used for curing solvent-free adhesives between composite film layers.

Oglas je automatski preveden. Moguće su greške u prijevodu.