Mašina za glodanje sa konusnim zupčanicima

Klingelnberg C 27

Model Klingelnberg C 27 – CNC Bevel Gear Milling Machine
Maximum workpiece diameter: 270 mm
Standard module: 1 – 4 mm (continuous) / 1 – 6 mm (single piece process)
Maximum tooth width: approx. 55 mm
Spiral angle: 0 – 60°
Number of teeth: 6 – 180
Maximum transmission ratio: 1 : 10
Minimum transmission ratio: 1 : 1
Cutter head radius: 39 – 105 mm (3" – 7.5")
Number of cutter groups (Oerlikon): 5 – 19
A-axis (cutter head spindle)
Mounting diameter, Gleason No. 14 – 1:24 Ø 58.34 mm
Adapter, Oerlikon short taper 1:4 Ø 130 mm
Spindle speed: 1000 rpm
B-axis (workpiece spindle)
Mounting diameter, Oerlikon external taper 1:4 Ø 140 mm
Internal taper No. 39 – 1:16 Ø 99.21 mm
Workpiece spindle bore: 90 mm
Workpiece spindle speed: 1000 rpm
C-axis
Swivel range: ± 90°
X-axis (milling depth axis)
Travel: 350 mm
Maximum speed: 10 m/min
Y-axis (workpiece positioning axis)
Travel: 665 mm
Maximum speed: 10 m/min
Z-axis (tool positioning axis)
Travel: ± 120 mm
Maximum speed: 10 m/min
Machine equipment:
CNC control Siemens 840D or Fanuc 160iT3
Electrical equipment: Oerlikon standard 3 x 400 V 50 Hz, control 24 V DC
Work area lighting
Control cabinet cooler
Swiveling control panel
Hydraulic system
Impulse lubrication
Automatic workpiece clamping with adjustable drawbar
Clamping stroke monitoring
Foot switch for workpiece clamping
Codsxur U Topfx Abrohd
Standard tool kit
Electrical data:
Total connected load: 40 kVA
Voltage: 3 x 400 V ±10 %
Frequency: 50 Hz ±1 %
Protection: 80 A slow blow
Power interruption: max. 3 ms
Voltage dip: max. 20 % for 20 ms
Voltage peaks: max. 200 % of nominal voltage for 1.5 ms
Harmonic content: max. 10 %
Line symmetry: max. 2 % voltage difference between two phases
Control voltage: 24 V DC
Compressed air supply:
Pressure: min. 7 bar – max. 10 bar
Consumption: 100 l/min
Pressure dew point: max. 10 °C
Temperature range: 10 °C – 40 °C
Particle size: max. 40 µm
Axes of deburring and milling unit:
Q milling axis
V1 deburrer infeed axis
U deburrer positioning axis

Oglas je automatski preveden. Moguće su greške u prijevodu.