Mašina za injekcijsko prešanjeKraussMaffei
EX 80-380 vollelektrisch/full electrical
Mašina za injekcijsko prešanje
KraussMaffei
EX 80-380 vollelektrisch/full electrical
Godina proizvodnje
2009
Stanje
Polovno
(potpuno funkcionalan)
Lokacija
Hannover 

Osnovni podaci
- Naziv mašine:
- Mašina za injekcijsko prešanje
- Proizvođač:
- KraussMaffei
- Godina proizvodnje:
- 2009
- Stanje:
- vrlo dobro (rabljeno)
- Funkcionalnost:
- potpuno funkcionalan
- Radni sati:
- 35.808 h
Cijena i lokacija
- Lokacija:
- 30 Hannover, Deutschland

Pozovite
Tehnički detalji
Motor i mjenjač
Zapremina motora:
204 cm³
Daljnje pojedinosti
Stezna sila:
800 kN
Pritisak ubrizgavanja:
1.860 šipka
Masa injekcije:
186 g
Promjer vijka:
40 mm
Detalji ponude
- ID oglasa:
- A21434367
- Ažuriranje:
- posljednji put 21.10.2026
Opis
Here, as a dealer of injection molding machines, we offer the following well-maintained, used injection molding machine:
We also purchase well-maintained injection molding machines manufactured from 2010 onwards.
We have been a wholesale supplier of injection molding machines for over 25 years.
Manufacturer: KraussMaffei
Type: KM EX 80-380 (fully electric)
Serial Number: 61013142
Year of Manufacture: 2009
Operating Hours: 35,808 h
Control System: MC 5
Fully functional
Condition: very well maintained
Machine comes from a German original owner
xxxxx without robot / without temperature control unit xxxxx
Extras:
- Needle-gate nozzle, pneumatically operated
Iodpfx Asyrd U Ujnletp
- Pneumatic valve 1 on back wall adapter plate (BWAP)
- Pneumatic control for 1 hot runner
- Pneumatic control for hot runner/cold runner
- Defect sorting chute
- Nozzle protection door - mold opening protection door, hinged
- Euromap interface 18 on front wall adapter plate (FWAP)
- Ejector plate, electrically operated on BWAP
- Hydraulic auxiliary unit for hydraulic core pulls
- Injection molding circuit
- 2 x hydraulic core pulls (on BWAP and FWAP)
- Pressure relief for core pulls on BWAP and FWAP
- Water manifold, 8-way
- 8 x temperature control points for hot runner
- Extrusion injection circuit with position point control
- 3 x 230V sockets / 2 x CEE 16A / 1 x CEE 32A
- Signal interface EUROMAP 67 for robot
- Start-up circuit, QS package, cycle time analysis, cycle memory, event log
- BluePOWER package – display of energy consumption
- Graphics analysis package, trend graph
- Interface for temperature control unit
- Cycle time analysis, cycle setpoint optimization
Main language: German
Injection Unit
Screw diameter: 40 mm
Injection weight: 186 g/PS
Injection pressure: 1860 bar
Injection volume: 204 ccm
Clamping Unit
Clamping force: 80 tons / 800 kN
Tie bar distance: 420 x 420 mm
Platen dimensions: 655 x 670 mm
Tool installation height: 250 mm
Maximum distance between platens: 750 mm
Ejector stroke / force: 100 mm / 22 kN
Clamping unit: fully electric
Warranty
Warranty until first commissioning
- Available immediately from our warehouse in Hanover, free loading onto the buyer's truck or free delivery to your location against reimbursement of freight costs throughout Europe.
Worldwide delivery by container or box is also possible. Organization of customs clearance included.
- The machine was tested before dismantling.
- The machine is in our sole ownership.
- The requested machine is available immediately in our warehouse in Hanover and will be offered after functional testing and can be inspected under power.
For information about the machines we offer and our company:
- We only sell our own machines that we have purchased from current production, from our warehouse in Hanover.
- All offered machines are checked and tested before dismantling.
- We do NOT sell insolvency goods. We are NOT a mediator who deals with third-party property.
- All offered machines come from successful companies for which maintenance and care are a matter of course.
- All offered machines can be inspected at our warehouse.
Oglas je automatski preveden. Moguće su greške u prijevodu.
We also purchase well-maintained injection molding machines manufactured from 2010 onwards.
We have been a wholesale supplier of injection molding machines for over 25 years.
Manufacturer: KraussMaffei
Type: KM EX 80-380 (fully electric)
Serial Number: 61013142
Year of Manufacture: 2009
Operating Hours: 35,808 h
Control System: MC 5
Fully functional
Condition: very well maintained
Machine comes from a German original owner
xxxxx without robot / without temperature control unit xxxxx
Extras:
- Needle-gate nozzle, pneumatically operated
Iodpfx Asyrd U Ujnletp
- Pneumatic valve 1 on back wall adapter plate (BWAP)
- Pneumatic control for 1 hot runner
- Pneumatic control for hot runner/cold runner
- Defect sorting chute
- Nozzle protection door - mold opening protection door, hinged
- Euromap interface 18 on front wall adapter plate (FWAP)
- Ejector plate, electrically operated on BWAP
- Hydraulic auxiliary unit for hydraulic core pulls
- Injection molding circuit
- 2 x hydraulic core pulls (on BWAP and FWAP)
- Pressure relief for core pulls on BWAP and FWAP
- Water manifold, 8-way
- 8 x temperature control points for hot runner
- Extrusion injection circuit with position point control
- 3 x 230V sockets / 2 x CEE 16A / 1 x CEE 32A
- Signal interface EUROMAP 67 for robot
- Start-up circuit, QS package, cycle time analysis, cycle memory, event log
- BluePOWER package – display of energy consumption
- Graphics analysis package, trend graph
- Interface for temperature control unit
- Cycle time analysis, cycle setpoint optimization
Main language: German
Injection Unit
Screw diameter: 40 mm
Injection weight: 186 g/PS
Injection pressure: 1860 bar
Injection volume: 204 ccm
Clamping Unit
Clamping force: 80 tons / 800 kN
Tie bar distance: 420 x 420 mm
Platen dimensions: 655 x 670 mm
Tool installation height: 250 mm
Maximum distance between platens: 750 mm
Ejector stroke / force: 100 mm / 22 kN
Clamping unit: fully electric
Warranty
Warranty until first commissioning
- Available immediately from our warehouse in Hanover, free loading onto the buyer's truck or free delivery to your location against reimbursement of freight costs throughout Europe.
Worldwide delivery by container or box is also possible. Organization of customs clearance included.
- The machine was tested before dismantling.
- The machine is in our sole ownership.
- The requested machine is available immediately in our warehouse in Hanover and will be offered after functional testing and can be inspected under power.
For information about the machines we offer and our company:
- We only sell our own machines that we have purchased from current production, from our warehouse in Hanover.
- All offered machines are checked and tested before dismantling.
- We do NOT sell insolvency goods. We are NOT a mediator who deals with third-party property.
- All offered machines come from successful companies for which maintenance and care are a matter of course.
- All offered machines can be inspected at our warehouse.
Oglas je automatski preveden. Moguće su greške u prijevodu.
Dokumenti
Ovi oglasi bi vas također mogli zanimati.
Uspješno
Vaša poruka je poslana.
Mali oglas
Wrocław
799 km
Mašina za brizganje
BattenfeldHM 60/350 S
BattenfeldHM 60/350 S
Uspješno
Vaša poruka je poslana.
Mali oglas
Weißenburg in Bayern
766 km
Mašina za brizganje
NetstalSynergy 1000-230
NetstalSynergy 1000-230
Uspješno
Vaša poruka je poslana.
Mali oglas
Hilzingen
811 km
Bruderer BSTA 110
BRUDERERBSTA 110
BRUDERERBSTA 110
Uspješno
Vaša poruka je poslana.
Mali oglas
Burgoberbach
803 km
Mašina za brizganje
KraussMaffeiKM 130-750CX 61010843
KraussMaffeiKM 130-750CX 61010843
Uspješno
Vaša poruka je poslana.
Mali oglas
Vaterstetten
656 km
Mašina za brizganje
KraussMaffei Technologies GmbHKM 80 / 250 PA G01
KraussMaffei Technologies GmbHKM 80 / 250 PA G01
Uspješno
Vaša poruka je poslana.
Mali oglas
Fuente de Cantos
2.101 km
Mašina za brušenje bez centra
ESTARTA310
ESTARTA310
Uspješno
Vaša poruka je poslana.
Mali oglas
Cuggiono
723 km
Vertikalni obradni centar
DOOSANDNM 6700L
DOOSANDNM 6700L
Uspješno
Vaša poruka je poslana.
Mali oglas
Belgija
1.236 km
CNC tokarsko-glodački centar
DMGNTX 2500/1500
DMGNTX 2500/1500
Uspješno
Vaša poruka je poslana.
Mali oglas
Szigetszentmiklós
395 km
Cilindrična brusilica
PalmaryGU20x40 NC unversal grinding machine
PalmaryGU20x40 NC unversal grinding machine
Uspješno
Vaša poruka je poslana.
Mali oglas
Eisingen
888 km
Mašina za brizganje
ENGELe-motion 310/160T
ENGELe-motion 310/160T
Vaš oglas je uspješno izbrisan
Došlo je do greške



















































































































































