MEP COBRA 352 SX EVO ugaona pila za aluminijum

MEP COBRA 352 SX EVO Aluminiumkreissäge

MEP COBRA 352 SX evo [Semi-automatic]

Article number CB352SX
motor power 1,5/2,2 kW
belt opening 180 mm
belt dimensions 350x32x3,4
Weight 285 Kg
Speed 1700/3400 1/min.
Cutting surface 0° 120 / 105 / 180x70
Cutting surface 45° right 120 / 100 / 135x60
Cutting surface 45° left
Cutting surface 60° right
Cutting surface 60° left

Description
Semi-automatic circular saw for sawing of solid and hollow aluminum materials and light alloys with electro-welded carbide tooth wheel.

Basic equipment:
-Machine for miter cuts from 45° right to 45° left.
-Alignment along the vertical gives the possibility of sawing operations with head inclined between 0° and 45° left.
Bsdschkv Iopfx Ad Nslc
-* MEP represents the latest generation of controls designed for semi-automatic machines with single axis microprocessors.
-CHARACTERISTICS: At the start of the cycle: - Vise closes and motor starts - Saw head lowers for cut - Motor stops - Saw head raises - Vise opens.
-New - Display with 16 characters x 2 lines for displaying the following technical parameters: + number of executed cuts + cutting time + ammeter + display of over 100 diagnostic messages and warnings.
-New - Display and entry of the alarm and error messages with the possibility of displaying the incidents that have occurred.

Electrical equipment:
-New - Low voltage control panel: membrane polyester keypad with thermoformed and highlighted push buttons and actuation control signal.
-Saw blade stroke programmable directly from the control panel, to adapt to the cutting material.
-Ball bearing mounted rotary table to ensure easy and accurate rotation.
-Clamping system consisting of two face vices that can be freely arranged along the longitudinal axis of the parts.
-Adjustable mechanical stops for quick positioning of the head in the angular positions at 0° and 45° right and left.
-Swarf extractor with preparation for OPTIONAL extraction system.
-Automatic saw blade lubrication system, operating only at the start of the cut.
-Machine is supplied without saw blade.
-Preparation for the installation of the minimal lubrication kit of the saw blade (OPTIONAL), besides the conventional standard lubrication with emulsion oil.
-Tool and instruction manual with spare parts list.

For further technical data, please refer to the attached PDF document. Catalog 2nd page !

Oglas je automatski preveden. Moguće su greške u prijevodu.