Preša za furnirORMA
HL 5100x1400
Preša za furnir
ORMA
HL 5100x1400
EXW Fiksna cijena plus PDV
49.000 €
Stanje
Polovno
(potpuno funkcionalan)
Lokacija
Češka Republika 

Osnovni podaci
- Naziv mašine:
- Preša za furnir
- Proizvođač:
- ORMA
- Model:
- HL 5100x1400
- Stanje:
- radionički obnovljen (korišten)
- Funkcionalnost:
- potpuno funkcionalan
Cijena i lokacija
EXW Fiksna cijena plus PDV
49.000 €
- Lokacija:
- Draha 427, 66459 Telnice, Česká republika

Pozovite
Detalji ponude
- ID oglasa:
- A18383796
- Ažuriranje:
- posljednji put 19.11.2026
Opis
Veneering press line, consisting of the following machines:
- OSAMA S2R adhesive applicator – 1300 mm – NEW MACHINE
- Feeder from the adhesive applicator to the conveyor
- Infeed conveyor, 6000 mm long x 950 mm wide, with drive
- Flat hydraulic press ORMA 5100x1400 mm – 12 pistons, minimum pressure 190 tons
- Outfeed conveyor, 6000 mm long x 950 mm wide, with drive
This press requires medium to high pressure for operation, to ensure the boards are 100% flat.
- Veneer board dimensions: 5100 x 1400 mm (solid, drilled steel boards, 50 mm thick)
- Board opening: 180 mm
- Total maximum pressure: 190 tons (or more)
- Pressure at full surface: up to 10 kg/cm2
- Number of hydraulic pistons: 12 pcs – piston diameter 140 mm
- MYLAR Teflon film on the boards
- Prepared for heating the boards with hot water, steam, or oil – without a boiler
- Machine dimensions: 2300 x 5100 mm x 2500 mm high, estimated weight 16 tons
Ksdpfx Anjvva Syolsnd
--The press features a semi-automatic loading and unloading mode. After pressing the start button, the material is fed into the press, the pressing cycle starts automatically, and after the set time, the press opens. Material is unloaded at the beginning of a new cycle.
--The pressing plates are coated with MYLAR film, which facilitates material loading. These are solid steel plates with internal channels and a thickness of 50 mm. The plates themselves weigh approximately 4 tons, and the total weight of the press is about 16 tons.
--The press heating system is not currently connected in our facility. It was originally connected to a boiler and hot water or steam distribution system. Oil can also be used as a heat transfer medium to achieve high temperatures. There are companies that specialize in this type of equipment. The board heating temperature depends on the type of heat transfer medium used.
Price: 49,000 EUR excluding VAT, without the OSAMA adhesive applicator
Price: 58,000 EUR excluding VAT, including the OSAMA adhesive applicator
Oglas je automatski preveden. Moguće su greške u prijevodu.
- OSAMA S2R adhesive applicator – 1300 mm – NEW MACHINE
- Feeder from the adhesive applicator to the conveyor
- Infeed conveyor, 6000 mm long x 950 mm wide, with drive
- Flat hydraulic press ORMA 5100x1400 mm – 12 pistons, minimum pressure 190 tons
- Outfeed conveyor, 6000 mm long x 950 mm wide, with drive
This press requires medium to high pressure for operation, to ensure the boards are 100% flat.
- Veneer board dimensions: 5100 x 1400 mm (solid, drilled steel boards, 50 mm thick)
- Board opening: 180 mm
- Total maximum pressure: 190 tons (or more)
- Pressure at full surface: up to 10 kg/cm2
- Number of hydraulic pistons: 12 pcs – piston diameter 140 mm
- MYLAR Teflon film on the boards
- Prepared for heating the boards with hot water, steam, or oil – without a boiler
- Machine dimensions: 2300 x 5100 mm x 2500 mm high, estimated weight 16 tons
Ksdpfx Anjvva Syolsnd
--The press features a semi-automatic loading and unloading mode. After pressing the start button, the material is fed into the press, the pressing cycle starts automatically, and after the set time, the press opens. Material is unloaded at the beginning of a new cycle.
--The pressing plates are coated with MYLAR film, which facilitates material loading. These are solid steel plates with internal channels and a thickness of 50 mm. The plates themselves weigh approximately 4 tons, and the total weight of the press is about 16 tons.
--The press heating system is not currently connected in our facility. It was originally connected to a boiler and hot water or steam distribution system. Oil can also be used as a heat transfer medium to achieve high temperatures. There are companies that specialize in this type of equipment. The board heating temperature depends on the type of heat transfer medium used.
Price: 49,000 EUR excluding VAT, without the OSAMA adhesive applicator
Price: 58,000 EUR excluding VAT, including the OSAMA adhesive applicator
Oglas je automatski preveden. Moguće su greške u prijevodu.
Dobavljač
Napomena: Registrujte se besplatno ili prijavite, za pristup svim informacijama.
Registriran od: 2020
10 Oglasi online
Pošaljite upit
Telefon & Faks
+420 530 ... oglasi
Ovi oglasi bi vas također mogli zanimati.
Uspješno
Vaša poruka je poslana.
Mali oglas
Bitburg
1.080 km
Mašina za nanošenje lepka
OsamaS4R/P-1400
OsamaS4R/P-1400
Uspješno
Vaša poruka je poslana.
Mali oglas
Bad Oeynhausen
1.135 km
Mašina za pakovanje u omot/film
CMBEBC 150/70 ERL 150
CMBEBC 150/70 ERL 150
Uspješno
Vaša poruka je poslana.
Mali oglas
Barntrup
1.099 km
CNC obradni centar SCM Morbidelli N100 22-31 PROSPACE (2022)
SCMMorbidelli N100 22-31 PROSPACE
SCMMorbidelli N100 22-31 PROSPACE
Uspješno
Vaša poruka je poslana.
Mali oglas
Sliven
713 km
Valjak za premazivanje
CeflaSmartcoater MF EVO
CeflaSmartcoater MF EVO
Uspješno
Vaša poruka je poslana.
Mali oglas
Barntrup
1.099 km
BIESSE Brema EKO 2.2 vertikalni CNC obradni centar (2022)
BIESSEBrema EKO 2.2
BIESSEBrema EKO 2.2
Uspješno
Vaša poruka je poslana.
Mali oglas
Timișoara
345 km
UV sušilica
CeflaFV 2 / 3500-46 SERTARE UVR2M
CeflaFV 2 / 3500-46 SERTARE UVR2M
Uspješno
Vaša poruka je poslana.
Mali oglas
Sesto Calende
742 km
Carrier obradni centar
UniteamCovertek
UniteamCovertek
Uspješno
Vaša poruka je poslana.
Mali oglas
Turska
1.311 km
Komatsu PC350 Rock Bucket
KomatsuPC350 Rock Bucket
KomatsuPC350 Rock Bucket
Uspješno
Vaša poruka je poslana.
Mali oglas
Roreto
789 km
ISTOVARI (JEDNOKAVNI)
RBO (BIESSE Group)Tornado SC/FE 1300
RBO (BIESSE Group)Tornado SC/FE 1300
Uspješno
Vaša poruka je poslana.
Mali oglas
Plovdiv
612 km
Obradni centar
ITALMACPegaso
ITALMACPegaso
Vaš oglas je uspješno izbrisan
Došlo je do greške











































































































