Bottom loading and top loading for gasoline, diesel, heating oil, etc. Saddle plate height 1200mm unloaded. Metering system: as per GMV with additional venting, meter DN 100 / 1,000 l/min, manufacturer Sening, with full-hose valve. 1 measured outlet. Emptying hose, cylindrical shape, separate parallel tank, material: light metal, 0.5 bar test pressure. 5, 5.0 mm minimum wall thickness, head 5 mm, bottom 7.5 mm. 5 Chamber 1 with sloped bottom plate, discharge slope towards the rear (wedge). 5 3 chambers, approx. 38,500 l gross, distribution from front: 13,300 / 6,000 / 19,200 liters gross. 5 Total filling volume approx. 36,200 l net, max. filling volumes: 12,500 / 5,500 / 18,200 liters (= max. filling volumes for bottom loading according to VOC. The actual usable filling volume also depends on the permissible axle loads and the permissible total weight!). 5 Baffle plates as required. 5 Discharge slope controlled by actuating the air suspension during discharge. Lifting loops at the front and rear of the tank to upright the partially loaded tank semi-trailer. 5 Conductors (deflectors) in the chambers to dissipate static charge. 5 Supports (small tables) as bottom valve protection and for holding the filling pipe during top loading, mounted in each chamber. Walkway / ladder / folding railing: as per safety walkway on the right. 5 1 folding railing within the dome fairing, right. 5 Intermediate platforms in front of the dome covers. 5 1 access ladder at the rear right. Dome fittings: 5 per chamber: • 1 manhole cover NW 500 (EN 13317) with filling opening DN 265, recessed installation. • 1 pneumatic tilt valve with sequential control. • 1 vent pot with flame arrester. • 1 overfill protection, electric VOC version (EN 13922). Bottom fittings: « Per chamber 1 pneumatic bottom valve DN 100 (EN 13316). « 1-channel collector. Bottom loading: 5 Bottom loading cabinet on the left. • Swing flap, lockable (square lock). • Drainage channel and drainage device (front). 5 per chamber: • 1 filling coupling. • 1 electric overfill protection system (VOC) 10-pole VOC socket, acting on the land side. Unloading device: « Right side in the fitting cabinet: • Bus flap, lockable (square lock). • Drainage channel and drainage device (front). 38,500 l capacity, 3 chambers (13,300/6,000/19,200), wall thickness 5mm, tank code LGBF for low-viscosity mineral oils class 3. 1 metering system, pump 1x full-hose, discharge on the right side of the vehicle, hydraulics: 8 Hydraulic pump drive. Hydraulic hoses. Coupling plugs (supply / leak oil / return). Pneumatics: for supplying the braking system, air suspension and the tank fittings: Air tank made of aluminum. Test connections combined. Accessories: 2 fire extinguishers 6 kg in a plastic box. 2 wheel chocks. 1 changeover warning board at the rear. 3 flame symbols, foldable. 3 hazard labels “environmentally hazardous substances” (Fisch & Baum), foldable. Rear view camera, manufacturer Motec, in the upper lighting bar. Pneumatically actuated flap at the rear of the trailer. Supply of the imaging components for the tractor unit (without installation). 1 container cabinet made of light metal, rear right. Acoustic reversing buzzer at the vehicle rear. Inclination indicator (level), right. 2 grounding lugs per vehicle side. 1 aluminum hammer, right. 1 shaft hook, right. 2 pole boards, right. 2 absorbent containers with holder. Pylons with holder. Shovel and broom. Drip trays under the outlets. Shaft cover.
Tjdpo Agduzsfx Akted
Oglas je automatski preveden. Moguće su greške u prijevodu.
