Niskopodna prikolica

SCHWARZMÜLLER Tieflader mit gekröpftem Plateau

You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.

Excerpt from the equipment list. Full equipment details available upon request.

Weights:
* Gross vehicle weight (permissible): 24 t
* Gross vehicle weight (technical): 30 t

Dimensions:
* Approx. 2,100 mm = raised front platform incl. gooseneck, beveled corners approx. 5,350 mm = lowbed platform – flat loading area approx. 850 mm = rear ramp slope
* Overall width approx. 2,550 mm (or with extensions approx. 3,000 mm)
* Loaded loading height approx. 870 mm
* When assembling trains, the legally permissible overall height and total train length must be observed!

Chassis:
* Steel welded construction with front gooseneck and rear bevel
* Ramp slope with central excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long
* Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the lowbed, 1x on the raised platform)
* 7 pairs of recessed, retractable approx. 10 t lashing rings (4x in the lowbed, 1x on the ramp slope, 2x on the raised platform)
* Standard ball-bearing turntable

Chassis attachments:
* Lowbed platform can be extended on both sides with approx. 50 mm softwood boards (track width of machines to be transported must not exceed the external frame width of approx. 2,550 mm)
* 4 pairs of foldable approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform between the longitudinal beams, 1 pair at the very back in the bucket recess left and right, 1 pair at the front on the raised platform in front of the gooseneck between the longitudinal beams, 1 pair at the rear of the lowbed in front of the ramp slope in the bucket recess left and right

Drawbar:
* Fixed drawbar with swivel eye approx. 40 + 50 mm, cranked design, silent bushing mounting, drawbar retaining spring with tensioner
* Truck coupling height from approx. 830 mm to approx. 1,030 mm
* Drawbar length approx. 1,800 mm

Support system:
Iaodpfx Asy Aug Rjd Ner
* 2 automatic folding supports at the rear

Axles:
* SAF air suspension low-bed axles with drum brakes, axle load capacity 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters

Wheels:
* 12 tires 235/75 R 17.5, 141J, brand according to manufacturer’s selection

Brake system/Suspension:
* Brake system compliant with ECE regulation R13
* Dual-line compressed air brake system
* Wabco make, EBS system 4S3M, sensors on 1st and 2nd axle
* RSS/RSP – stability program
* Spring-actuated parking brake on 2nd and 3rd axle
* Brake/air connection lines with 2 individual couplings (yellow/red)
* EBS/ABS connection cable
* Air suspension with lift and lower function (rear axles only), automatic ride height adjustment from 15 km/h (RTR), with axle stop on front axle

Assistance/Safety systems:
* SWIT – Schwarzmüller Intelligent Telematics
* Axle load display via EBS Canbus signal for display in the cab (truck must be properly prepared; not a calibrated scale)
* Tire pressure monitoring according to ECE regulation 141, with pressure sensor in the wheels, for display in cab (display must be present in tractor unit)

Flooring:
* Approx. 50 mm impregnated softwood floor, protruding approx. 5–10 mm above the top of the frame
* Steel chequer plate cover above the wheels

Ramps:
* 2 foldable, single-piece lightweight steel loading ramps, length approx. 2,800 mm, width approx. 750 mm, with approx. 35 mm impregnated hardwood floor
* Ramps adjustable

Oglas je automatski preveden. Moguće su greške u prijevodu.