Stacionarni uređaj za analizu metala

Spectro SPECTROLAB F / LAVFC01A

Manufacturer: SPECTRO Analytical Instruments GmbH & Co. KG
Type: SPECTROLAB F / LAVFC01A
Year of Manufacture: 2004
Project/Order No.: 16996/04
Lab No.: 116996-04
Stationary metal analysis instrument / OES spark spectrometer for copper alloys

Stationary SPECTRO SPECTROLAB F metal analysis instrument for quantitative material analysis
using optical emission spectrometry (OES/spark spectrometry).
According to the available original documentation, the system is designed for the analysis of
copper-based materials. The programs CU-00 for standardizing the Cu base, CU-20 for Cu/Zn alloys,
and CU-70 for Cu/Al alloys are installed and documented.
The spectrometer has three documented optics and measurement channels for numerous
alloy elements and accompanying elements. Among others, it detects Cu, Zn, Pb, Sn, Al, Fe, Ni,
Si, Mn, Mg, Cr, Co, Cd, Sb, P, and S.
Extensive original documentation is available for the instrument, including test and
photomultiplier protocols, configuration documents, standardization documents, and the
operating manual for the Spark Analyzer Vision software. Various re-calibration/reference samples
and accessories are also included.
An existing analysis printout dated December 20, 2022, documents the practical use of the
system for the analysis of CuZn40Pb2 materials. The printout shows measured values for numerous
alloy and trace elements.

Used condition with signs of wear and tear due to age and use.
The instrument dates from 2004. Extensive instrument-specific documentation, accessories,
and re-calibration/reference samples are available. The use and performance of material
analyses are documented by existing analysis printouts from December 2022.

Scope of delivery
• SPECTRO SPECTROLAB F metal analysis instrument
• Available re-calibration/reference samples
• Various sample specimens and standards
• Set of cables or available connection lines
Tjdpfx Akezx Dwnotod
• Small parts and consumables
• Adapter for small parts
• Available boron nitride discs
• Available SPECTRO accessories
• Software/data carrier, including SPECTRO Data Backup
• Documentation and test documents
• Operating manual Spark Analyzer Vision
• Documents for DIA 2000 / DIA2000SE
• Photomultiplier test protocols
• Configuration and standardization documents
PC, monitor, and printer are listed in the original delivery documents.

Measurement method: Optical emission spectrometry (OES) / Spark spectrometry
Design: Stationary metal analysis instrument
Readout system: MICRO 8
Calibration: Cu-base
Applications: Cu-20 / Cu-70
Standardization: CU-00 – Cu-Base
Installed programs:
CU-00 – Standardization Cu-Base
CU-20 – Cu/Zn alloys
CU-70 – Cu/Al alloys
Optical system:
1 × UV optic, documented with 6 lines
2 × Air optics, documented with 13 / 7 lines
Optic 1: 3600 / 750
Optic 2: 3600 / 750
Optic 3: 2400 / 750
Monochromator: No
Excitation source: 3000 / 300 Hz / Pure Ar
Operating voltage: 230 V
Mains frequency: 50 Hz
Operating language: German
Documented elements:
Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, S

Photomultiplier: predominantly R6350, individual UV channels R6351 according to test documents
Software according to documentation: DIA 2000 Basis / DIA2000SE, Spark Analyzer Vision
Spark Analyzer Vision manual: Version 09/2004
Documented software version: 1.40.0xx

Oglas je automatski preveden. Moguće su greške u prijevodu.