Ćelija za simulaciju klime

TIRA KB 127 TCZ 4022 S -2K -40 bis +140°C

TIRA
Type: TCZ 4022 S -2K
Description: Air-cooled climate simulation cell
System structure:
The system consists of the following main components:
Walk-in, insulated cell
Air treatment room
Dcjdpfx Aevx S Hhehzjr
Humidification system
Machine room
Switch cabinet
Technical data:
Performance range for temperature testing:
Temperature range -40...+140°C
Temperature constancy, in the supply air: (time-wise) ≤ ± 0.5°C
without them. Test room load according to (DIN 50011 Τ13) EN 60068
Temperature constancy, in the supply air: (spatial) ≤ ± 1.0°C
without thermal test room load according to (DIN 50011) EN 60068
Heating rate (according to DIN 50011) approx. 2.0 K/min
without thermal test room load (according to DIN 50011)
EN 60068) or test material in the temperature range of -30°C...+85°C
Cooling rate (according to DIN 50011) approx. 2.0 K/min
without thermal test room load (according to DIN 50011)
EN 60068) or test material in the temperature range of -30°C...+85°C
Performance range for climate test:
Temperature range +10...+90°C
Humidity working range 10...approx. 95% r.H
without thermal test room touch
Dew point temperature range +5...+89°C
without thermal test room touch
Humidity constancy (in the supply air) (time-wise) ≤ ± 2.5% r.H
measured in the supply air
Performance range for climate testing with heat compensation
Temperature range + 15...+ 80°C
Humidity 15...approx. 80% r.H
without thermal test room load
with max. 16 kW heat compensation
Dew point temperature range +10...+74°C
without thermal test room touch
Dimensions: test room (WxDxH) approx. 2260 x 4648 x 2260 mm
Dimensions: external dimensions (WxDxH) approx. 2660 x 6460 x 2800 mm
clear doorway test room door (W x H) 2260 x 2260 mm
climate module KB 127 (W x D x H) 1700 x 800 x 1400 mm
switch cabinet (W x D x H) 800 x 500 x 2000 mm
design:
air flow: supply air: perforated sheet on the rear wall, in the ceiling area
exhaust air: perforated sheet on the rear wall, in the floor area
temperature control:
direct cooling by evaporation of
refrigerant in a finned heat exchanger:
heating with electric resistance heater
dehumidification:
direct dehumidification by evaporation of
refrigerant in a heat exchanger
interior paneling: stainless steel
outer paneling: sheet steel, galvanized, plastic-coated
floor design: stainless steel,
floor load 15000 N/m²
wheel load (contact surface ≥4cm²) 1500 N/wheelDoor: double-leaf door, stainless steel, painted on the outside with
viewing window (WxH) l000xl000 mm
Test room lighting: 4 spotlights of 500 W each
Insulation Two-layer insulation, 80 mm PUR foam,
120 mm mineral wool
Refrigerator (1 piece) Bltzer 6G-30.2Y
Refrigerant, R449A!
Refrigeration machine oil SEZ 32
Steam humidifier (1 piece) EDB 40Color:
Cell RAL9010, white
Door RAL9010, white
Machine unit RAL 7032, pebble gray
Control cabinet RAL 7032, pebble gray
Mass:
Total system
approx. 4900 kg
Machine set KB 127 approx. 750 kg
Control cabinet approx. 120 kg
Humidification system approx. 64 kgConnections:
Nominal voltage 400 V +6%/-10% 3/PA 50Hz
Nominal power 95 kW
Nominal current 150 A

Oglas je automatski preveden. Moguće su greške u prijevodu.