Portalna glodalica visoke dinamike

FPT Industrie DINOMAX 1

CNC Heidenhain iTNC 530 S.P.

WORKING AREA
Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50

WORKTABLE
Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement.

AXIS CHARACTERISTICS
Axis feed rate: mm/min 50.000 Acceleration: m/s² 4

WORKING AREA (CLEARANCES)
Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330

CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE
Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors.
B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893
The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity.

CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK)
30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips.
Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10

MEASURING SCALE PRESSURIZATION
Pneumatic system complete with control unit for pressurizing the measuring scales.

SPRAY-MIST TOOL LUBRICATION/COOLING
Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality.

EXTERNAL TOOL COOLING
Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar.

REQUIRED CONNECTIONS
Maximum installed power: kW 150 Maximum current required: A 235

MACHINE EQUIPPED WITH:
• Heidenhain HR550 remote electronic handwheel
• Various tooling included with the machine
• Renishaw probe
• BLUM laser presetting system
• AUTOCAL automatic head calibration system
• Visormax subscription for remote monitoring
• Electrical cabinet air conditioning unit
Guodjzb Evlopfx Abasg
• Cooling system for all axes and the electrospindle
• No. 2 chip conveyors positioned on both sides of the worktable
• User and maintenance manual and CE declaration of conformity