Ručna aluminijska kružna pila
UK 300 P mit Pneumatik Spanner
Ručna aluminijska kružna pila
UK 300 P mit Pneumatik Spanner
EXW fiksna cijena plus PDV
2.552 €
godina proizvodnje
2025
Stanje
Novi
Lokacija
Bopfingen 

Slike prikazuju
Prikaži kartu
Podaci o mašini
Cijena i lokacija
EXW fiksna cijena plus PDV
2.552 €
- Lokacija:
- Gewerbehof 27, 73441 Bopfingen, DE
Pozovite
Detalji ponude
- ID oglasa:
- A7451681
- ažuriranje:
- posljednji put 14.03.2025
Opis
Aluminum circular saw UK 300 P, manual
The UK 300 P is a manual table saw (pneumatic clamping) with simple safer
Service! Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK 300P
has a compact design with clear operation. The saw cut is done manually by
down into the material to be processed. The material is clamped using two pneumatic clamping cylinders.
Furthermore, this model is equipped with a minimum lubrication system and a fixed guard in front of the cutting area.
equipment
Guodpfxsidqbbs Aa Roh
Compact, closed design with clear operation
two pneumatic clamping cylinders
Fixed protection from the cutting area
Saw blade ø 300 mm
Manual cutting feed
Mist spray device for air-oil cooling
workflow
1) Setting the cutting angle
2) Loading the material
3) Pneumatic clamping of the material
4) Press the start button to start the saw blade
5) the saw cut must be carried out manually with a hand lever
6) after the end of the cut, the machine is switched off!
It is always possible for you to inspect the desired system in our production/demonstration hall.
Please do not hesitate to contact us.
The UK 300 P is a manual table saw (pneumatic clamping) with simple safer
Service! Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK 300P
has a compact design with clear operation. The saw cut is done manually by
down into the material to be processed. The material is clamped using two pneumatic clamping cylinders.
Furthermore, this model is equipped with a minimum lubrication system and a fixed guard in front of the cutting area.
equipment
Guodpfxsidqbbs Aa Roh
Compact, closed design with clear operation
two pneumatic clamping cylinders
Fixed protection from the cutting area
Saw blade ø 300 mm
Manual cutting feed
Mist spray device for air-oil cooling
workflow
1) Setting the cutting angle
2) Loading the material
3) Pneumatic clamping of the material
4) Press the start button to start the saw blade
5) the saw cut must be carried out manually with a hand lever
6) after the end of the cut, the machine is switched off!
It is always possible for you to inspect the desired system in our production/demonstration hall.
Please do not hesitate to contact us.
Dobavljač
Napomena: Registrujte se besplatno ili prijavite, za pristup svim informacijama.
Registriran od: 2017
Pošaljite upit
Telefon & Faks
+49 7362 ... oglasi
Vaš oglas je uspješno izbrisan
Došlo je do greške