Univerzalna alatna glodalica, remontovana 2008. godine od strane MMD, univerzalna glodalicaMAHO
MH 800 P
Univerzalna alatna glodalica, remontovana 2008. godine od strane MMD, univerzalna glodalica
MAHO
MH 800 P
fiksna cijena plus PDV
24.000 €
Stanje
Polovno
Lokacija
Hessisch Lichtenau 

Slike prikazuju
Prikaži kartu
Podaci o mašini
- Naziv mašine:
- Univerzalna alatna glodalica, remontovana 2008. godine od strane MMD, univerzalna glodalica
- proizvođač:
- MAHO
- Model:
- MH 800 P
- Stanje:
- polovno
Cijena i lokacija
fiksna cijena plus PDV
24.000 €
- Lokacija:
- 37235 Hessisch Lichtenau
Pozovite
Detalji ponude
- ID oglasa:
- A18557396
- Referentni broj:
- 60849
- ažuriranje:
- posljednji put 13.07.2025
Opis
Universal Tool Milling Machine MAHO Type MH 800 P
with digital readout and HEIDENHAIN TNC 121 contouring control
. 80983 Year of manufacture: 1982
Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company.
Travel X: 700 mm, Y: 450 mm, Z: 500 mm
Table size: 1050 x 627 mm
Spindle taper: ISO 40
Spindle speed: 40–2000 rpm, 18 steps
Feed X, Z-axis: 10–500 mm/min, stepless
Feed Y-axis: 5–250 mm/min, stepless
Rapid traverse X, Z-axis: 1.4 m/min
Rapid traverse Y-axis: 0.7 m/min
Quill vertical travel: 100 mm
Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev
Quill horizontal travel: 100 mm
Spindle drive: 5.5 kW
Power supply: 380 Volt, 50 Hz, 10 kW
- NC contouring control HEIDENHAIN TNC 121
- Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps)
- Hydro-mechanical tool clamping
Kdjdpfx Aasv Amrysdsu
- Coolant system integrated in the machine base
- Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment
- Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3°
- Swiveling control panel
- Central lubrication
- Operating manual
- Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg
Space requirements L x W x H 2650 x 2000 x 2450 mm
Weight: 3700 kg + 550 kg steel plate
Total weight: 4250 kg (actual)
Very good condition
Oglas je automatski preveden. Moguće su greške u prijevodu.
with digital readout and HEIDENHAIN TNC 121 contouring control
. 80983 Year of manufacture: 1982
Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company.
Travel X: 700 mm, Y: 450 mm, Z: 500 mm
Table size: 1050 x 627 mm
Spindle taper: ISO 40
Spindle speed: 40–2000 rpm, 18 steps
Feed X, Z-axis: 10–500 mm/min, stepless
Feed Y-axis: 5–250 mm/min, stepless
Rapid traverse X, Z-axis: 1.4 m/min
Rapid traverse Y-axis: 0.7 m/min
Quill vertical travel: 100 mm
Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev
Quill horizontal travel: 100 mm
Spindle drive: 5.5 kW
Power supply: 380 Volt, 50 Hz, 10 kW
- NC contouring control HEIDENHAIN TNC 121
- Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps)
- Hydro-mechanical tool clamping
Kdjdpfx Aasv Amrysdsu
- Coolant system integrated in the machine base
- Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment
- Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3°
- Swiveling control panel
- Central lubrication
- Operating manual
- Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg
Space requirements L x W x H 2650 x 2000 x 2450 mm
Weight: 3700 kg + 550 kg steel plate
Total weight: 4250 kg (actual)
Very good condition
Oglas je automatski preveden. Moguće su greške u prijevodu.
Dobavljač
Napomena: Registrujte se besplatno ili prijavite, za pristup svim informacijama.
Registriran od: 2013
Pošaljite upit
Telefon & Faks
+49 5602 ... oglasi
Vaš oglas je uspješno izbrisan
Došlo je do greške